Model GXT860/895 Series
When the Battery Meter drops to 1 bar 
, the TX Power will
!Note : You cannot adjust the power setting on the FRS channels (8~14 and 34~37). They are set to Low power per FCC regulations.automatically switch from Hi(H) or Med(M) to Lo(L) level.
VOX (Hands-Free Transmission)
Your radio has 5 VOX level settings: (oF/1~5).
To set VOX, press the MENU button until the display shows “VOX” blinking while on the right of the CHANNEL NUMBER display, an “oF” icon appears. Select “1~5” by pressing the 
/
buttons and push the PTT key, or press the MENU button again to move to the next feature setting.
VOX will be more sensitive on the “1” setting than on the “5” setting. To turn VOX off, press the MENU button until the display shows “VOX” blinking while on the right of the CHANNEL NUMBER display, a “1~5” icon appears. Select “oF” by pressing the 
/
buttons and push the PTT key, or press the MENU button again to move to the next feature setting.
SILENT OPERATION
Your GXT860/895 Series has a SILENT OPERATION mode. In this mode, all “beeps” and “tones” are disabled.
To turn the SILENT OPERATION mode on, press the MENU button until the display shows a “bP” icon while on the right of the “bP” display, an “on” icon appears. Select “of” by pressing the
/
buttons and push the PTT key or MENU button.
To turn the SILENT OPERATION mode off, press the MENU button until the display shows a “bP” icon while on the right of the “bP” display, an “oF” icon appears. Select “on” by pressing the
/
buttons and push the PTT key or MENU button.
ROGER BEEP (end of transmission) TONE
When the PTT button is released, the radio will beep to confirm to other users that your transmission has finished.
To turn the ROGER BEEP tone on, press the MENU button until the display shows an “rb” icon while on the right of the “rb” display, an “oF” icon appears. Select “on” by pressing the 
/
buttons and push the PTT key, or press the MENU button to move to the next feature setting.
Page 10 | www.midlandusa.com |