LCD Display Controls | Midland Radio LXT112 Series specification

Welcome to the world of Midland electronics

Congratulations on your purchase of a high quality MIDLAND product. Your 2-way radio represents the state-of-the-art in high-tech engineering. Designed for GMRS (General Mobile Radio Service) operation, this compact package is big in performance. It is a quality piece of electronic equipment, skillfully constructed with the finest components. The circuitry is all solid-state and mounted on a rugged printed circuit board. Your two- way radio is designed for reliable and trouble-free performance for years to come.

LCD DISPLAY

CONTROLS

1.TRANSMIT (TX) ICON – Indicates radio is transmitting a signal.

2.VOLUME METER – Indicates the volume setting of the radio.

3.RECEIVE (RX) ICON – Indicates radio is receiving a transmission.

4.LOW BATTERY ICON – Indicates the battery level is low.

5.VOX ICON – Indicates when VOX mode is active.

6.CHANNEL NUMBER – Changes from 1~22 on GMRS/FRS band.

7.PTT Button – Press and hold to transmit voice communication.

8.SCAN/LOCK Button – Press to enter SCAN mode. Press and hold to turn KEY LOCK on/off.

9.UP s and DOWN t Button – Make adjustments in MENU mode.

10.SPEAKER – Built-in speaker.

11.ANTENNA

12.EXTERNAL SPEAKER/MIC/CHG. JACK

13.POWER / MODE Button – Press and hold for at least 3 seconds to turn the radio on/off. Press momentarily to access Menu mode.

14.MIC – Built-in microphone.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device does not cause harmful interference, and (2) this radio must accept any interference that may cause undesired operation.

To maintain compliance with FCC’s RF exposure guidelines, for body-worn operation, this radio has been tested and meets the FCC RF exposure guidelines when used with Midland Radio Corp. accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.