Panasonic SC-BT100 warranty Speaker settings, Speaker presence settings Changing the delay time

Changing settings with the setup menu

Speaker settings

Speaker presence settings Changing the delay time

(Center, surround and surround back speakers only)

1Press [3, 4, 2, 1] to select the speaker icon and press [OK].

L	ms	C	dB	R
	0.0		0.0
					Center
Complete			dB	SW
Test			0.0
LS	dB		dB		Surround
	0.0	0.0	0.0
dB	LB	ms	RB	dB	Surround back§1
0.0		0.0		0.0

(Effective when playing multi-channel audio) (Center, surround and surround back speakers only)

For optimum listening with 7.1/5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If you have to place the center, surround and surround back speakers closer to the seating position, adjust the delay time to make up for the difference.

If either distance A or B is less than C, find the difference in the relevant table and change to the recommended setting.

5.1ch speaker connection 7.1ch speaker connection

2Press [3, 4] to select the setting and press [OK].

Icon examples:

Select when the center speaker is

Cconnected and in use.

Center

§2 Select when the center speaker is not

Approximate room dimensions

	C
L	C	R	L



SW

C

C R

SW

 



connected or not in use.



LS LS



RS RS

	Select when the surround speakers are
LS	connected and in use.

LS	RS	LB
LS	RS	LB

RB

RB

Surround

Select when the surround speakers are not connected or not in use.

Select when

–using the optional Panasonic wireless system SH-FX67 and

		speaker system SB-HS100A to
		enjoy 7.1ch surround sound.
Surround	LB
		– connecting an amplifier to the
back§1		SURROUND BACK terminal at the
		back of the main unit to enjoy 7.1ch
		surround sound.
		Select when the surround back speakers
		are not connected or not in use.

§1Surround back speakers are set to “ ” by default.

§2You can select “ ” only when surround speakers are set to “ ”.

e.g.,

5.1ch speaker connection 7.1ch speaker connection

Circle of constant primary listening distance

: Actual speaker position

: Ideal speaker position ABC: Primary listening distance

1Press [3, 4, 2, 1] to select the delay time box and press [OK].

2 Press [3, 4] to select the setting and press [OK].

L	ms	C	dB	R
	0.0		0.0
				Center
Complete			dB	SW
Test			0.0
				Surround
LS	dB	ms	dB	RS
	0.0	0.0	0.0
				Surround back
dB	LB	ms	RB	dB
0.0		0.0		0.0

A Center speaker B Surround/Surround back

L	ms	C	dB	R
	0.0		0.0
Complete			dB	SW
Test			0.0
LS	dB		dB
	0.0	0.0	0.0
dB	LB	ms	RB	dB
0.0		0.0		0.0

L	ms	C	dB	R
	0.0		0.0
Complete			dB	SW
Test			0.0
LS	dB		dB
	0.0	0.0	0.0
dB	LB	ms	RB	dB
0.0		0.0		0.0

		speakers
Difference	Setting
Approx. 34 cm (1 ft. 1 in.)	1.0 ms	Difference	Setting
Approx. 68 cm (2 ft. 2 in.)	2.0 ms	Approx. 170 cm (5 ft. 6 in.)	5.0 ms
Approx. 102 cm (3 ft. 4 in.)	3.0 ms	Approx. 340 cm (11 ft. 1 in.)	10.0 ms
Approx. 136 cm (4 ft. 5 in.)	4.0 ms	Approx. 510 cm (16 ft. 8 in.)	15.0 ms
Approx. 170 cm (5 ft. 6 in.)	5.0 ms

Adjusting speaker level

(Effective when playing multi-channel audio)

1 Select “Test” and press [OK].

Center

A test signal is output.

Front (L) ——)Center ——)Front (R) ——)Surround (RS)

:;

Surround (LS)(— Surround back (LB) (— Surround back (RB)

2While listening to the test signal, press [3, 4] to adjust the volume

of each speaker.

Center speaker: (r6 dB to s6 dB)

Surround and Surround back speakers: (r10 dB to s10 dB)

≥Set each speaker level according to the volume of the Front (L) and Front (R) speaker volume respectively.

3Press [OK].

The test signal stops.

≥No signal is output for the subwoofer. To adjust its volume, see page 26, Adjusting speaker level during play.

QT9129

	L	ms	C		R
		0.0
Test	Complete			dB	SW
	Test			0.0
	LS	dB	ms	dB	RS
Surround		0.0	0.0	0.0
(LS)	dB	LB	ms	RB	dB
	0.0		0.0		0.0

Surround (RS)

Surround back (RB) Surround back (LB)

34	∫ To finish the speaker setting
	Press [3, 4, 2, 1] to select “Complete” and press [OK].