Kenwood TK-3200LP, TK-2200LP manual Options

Options

	■ KNB-29N	■ KRA-23		■ KHS-7A		■ KHS-27
	Ni-MH Battery Pack		UHF Low Profile		Single Muff Headset	D-Ring In-line
	(1,500mAh)		Helical Antenna		with In-line PTT	PTT Headset
	■ KNB-45L	■ KRA-26		■ KHS-8BL		■ HMC-3
	2,000mAh/7.4V		VHF Helical Antenna		2-wire Palm Mic	Headset with PTT
	Li-Ion Battery Pack	■ KRA-27			with Earphone (Black)	Built-in Vox
	■ KSC-31			■ KHS-8BE
			UHF Whip Antenna			■ KMB-25
	Fast Charger				2-wire Palm Mic
		■ KMC-45				Six Unit Charger
	For the KNB-29N (3-Hour)				with Earphone (Beige)
						Adapter (for six
	■ KSC-35K		Compact Speaker	■ KHS-22		KSC-31/35K chargers
			Microphone			■ KMB-28	(chargers not included)
	Fast Charger				Behind-the-head
	For the KNB-45L (3-Hour)	■ KMC-21			Headset with PTT	Six Unit Charger
	■ KRA-16		Lightweight Compact	■ KHS-23		Adapter (for six
			Speaker Microphone		2-wire Palm Mic	KSC-35K chargers (chargers not included)
	VHF Stubby Antenna					■ KBH-10
		■ KEP-2		■ KHS-25
	■ KRA-17					Belt Clip
			Earphone Kit for		D-Ring Ear Hanger
	UHF Stubby Antenna
			KMC-17		with PTT & Boom Mic	■ KWR-1
	■ KRA-22		(2.5mm plug)			Water Resistance Bag
				■ KHS-26
		■ KHS-7				■ KLH-126
	VHF Low Profile
					Earbud In-line
	Helical Antenna		Single Muff Headset		PTT Headset	Nylon Case
Specifications					All accessories and options may not be available in all markets.
					Contact an authorized Kenwood dealer for details and complete list of all accessories and options.
	Model	TK-2200LP VHF	TK-3200LP UHF		Model	TK-2200LP VHF	TK-3200LP UHF
	GENERAL				RECEIVER (Measurements made per TIA/EIA-603)

Frequency Range	150-174 MHz	450-470 MHz
Number of Channels
LV2P / LU2P	2	2
LV8P	8	-
LU15P	-	15
Channel Spacing
Wide/Narrow	25, 30kHz/12.5,15kHz	25kHz/12.5kHz
Channel Step	2.5, 5, 6.25, 7.5kHz	5, 6.25kHz
Operating Voltage	7.5V DC±20%
Battery Life (5-5-90 duty cycle)
with KNB-29N (1500mAh)	14 hours (Battery Saver Off)
	18 hours (Battery Saver On)
with KNB-45L* (2000mAh)	17 hours (Battery Saver Off)
	22 hours (Battery Saver On)
Operating Temperature Range**	-22°F ~ +140°F (-30°C ~ +60°C)
Frequency Stability	±2.5ppm (-22°F ~ +140°F)
Antenna Impedance	50 Ω
Channel Frequency Spread	24MHz	20MHz
Dimensions (W x H x D), Projections not Included
Radio Only	2.13” x 4.8” x 0.83” (54 x 122 x 21.1mm)
with KNB-29N/KNB-45L	2.13” x 4.8” x 1.30” (54 x 122 x 33mm)
Weight (net)
Radio Only	5.6oz (160g)
with KNB-29N	12.7oz (360g)
with KNB-45L	9.9oz (280g)
FCC ID	ALH36913120	ALH36923130
FCC Compliance	Parts 22/74/90	Parts 90/95

*KNB-45L included with radio package.

**-14°F ~ +140°F (-10°C ~ +60°C) When KNB-29N/45L in use.

Sensitivity (12dB SINAD)
Wide/Narrow		0.25µV/0.28µV
Selectivity
Wide/Narrow		70dB/60dB
Intermodulation Distortion
Wide/Narrow		65dB/60dB
Spurious Response	65dB	60dB
Audio Output	500mW with less than 10% distortion

TRANSMITTER (Measurements made per TIA/EIA-603)

RF Power Output
High/Low	2W/1W	2W/1W
Spurious Response		65dB
Modulation
Wide/Narrow		16KØF3E/11KØF3E
FM Noise
Wide/Narrow		45/40dB
Audio Distortion		Less than 5%

Kenwood follows a policy of continuous advancement in development.

For this reason specifications may be changed without notice.

FleetSync® is a registered trademark of Kenwood Corporation.

All other trademarks are property of their respective owners.

Applicable MIL-STD & IP

Standard	MIL 810C	MIL 810D	MIL 810E	MIL 810F
	Methods/Procedures	Methods/Procedures	Methods/Procedures	Methods/Procedures
Low Pressure	500.1/Procedure I	500.2/Procedure I, II	500.3/Procedure I, II	500.4/Procedure I, II
High Temperature	501.1/Procedure I, II	501.2/Procedure I, II	501.3/Procedure I, II	501.4/Procedure I, II
Low Temperature	502.1/Procedure I	502.2/Procedure I, II	502.3/Procedure I, II	502.4/Procedure I, II
Temperature Shock	503.1/Procedure I	503.2/Procedure I	503.3/Procedure I	503.4/Procedure I, II
Solar Radiation	505.1/Procedure I	505.2/Procedure I	505.3/Procedure I	505.4/Procedure I
Rain	506.1/Procedure I, II	506.2/Procedure I, II	506.3/Procedure I, II	506.4/Procedure I, III
Humidity	507.1/Procedure I, II	507.2/Procedure II, III	507.3/Procedure II, III	507.4
Salt Fog	509.1/Procedure I	509.2/Procedure I	509.3/Procedure I	509.4
Dust	510.1/Procedure I	510.2/Procedure I	510.3/Procedure I	510.4/Procedure I, III
Vibration	514.2/Procedure VIII, X	514.3/Procedure I	514.4/Procedure I	514.5/Procedure I
Shock	516.2/Procedure I, II, V	516.3/Procedure I, IV	516.4/Procedure I, IV	516.5/Procedure I, IV
International Protection	Standard
Dust & Water Protection	IP54/55

ACCESSORIES INCLUDED

•KNB-45L Li-Ion Battery

•KSC-35K 3-Hour Fast Charger

•KBH-10 Spring Action Belt Clip

•Removable Antenna

*To meet MIL 810 and IP grade, the 2-pin connector cover has to be connected.

JQA-QMA1205

ADS#41008 Printed in USA