Model GXT500/550 Series |
|
|
|
| ® | ||||
GXT500/550 SERIES QUICK REFERENCE CHART |
|
| |||||||
MENU | Channel | Privacy | Power | eVOX | Vibrate | Roger Beep | Call Tone | Silent Operation | |
Press & | 1~22 | oF~38 | H/M/L | oF/1/2 | On/Off | On/Off | 1~5 | On/Off | |
hold Menu | |||||||||
|
|
|
|
|
|
|
| ||
button | WX Channel |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| ||
1~10
MONITOR
Pressing and holding the MONITOR button for 1 second will let you hear noise so you can adjust the volume level of the radio when not receiving a signal. This should be used to check activity on your current channel before transmitting.
Press and hold the MONITOR button for 1 second again to get out of MONITOR mode.
SCAN
Your GXT500/550 Series can scan all 22 channels for activity. To enter, quickly press the SCAN button. Repeat the same procedure to exit. Your radio will rapidly scan each of the 22 channels and stop on any active channel for 5 seconds before resuming scan.
When you press the PTT button to transmit on an active channel, the scanning function will stop and remain on the active channel. To resume scanning, quickly press the SCAN button.
Page 9 | www.midlandradio.com |