Doro PMR 510 manual Other, Troubleshooting

Page 8

English

Other

Troubleshooting

The handset will not turn on

-Check the batteries are installed correctly.

-Ensure the batteries are in good condition and/or are fully charged.

Cannot change channel or volume setting

-Ensure the Channel Lock function is not active.

Reduced operating range

-Batteries may be failing, replace or recharge batteries if the indicator shows low.

-Operating in built up areas or undulating terrain? Line of sight/flat open environment provides for maximum range.

No or Weak reception

-Are both handsets set to the same channel?

-Reduce the distance between the handsets.

-Increase the receive volume.

-Activate the monitor function.

Sound is distorted

-Speak clearly towards the handset from a distance of 10cm.

-Adjust the receive volume to a comfortable level.

-Check the battery charge level.

8

www.doro.com

Image 8
Contents Pmr Scan Setting Up UnpackingApproved usage BatteriesBelt clips RangeHeadset Turning the handset On/OffOperation Channel SelectionRepeater Operation Channel lockVolume control Signal searchCommunication between the handsets Monitor functionOperating Channels and Frequencies Type of Call signalAutomatic shutdown Troubleshooting OtherGuarantee Australia and New ZealandPage Page Australia Version