Reservation Mode manual transmission only

Reservation Mode (manual transmission only)

In order to auto-start your manual transmission vehicle, you must first set the CompuStar system to Reservation Mode before leaving your vehicle. The purpose of Reservation Mode is to leave the transmission gear in the neutral position when you leave your vehicle. Reservation mode is intended for use in MANUAL TRANSMISSIONS ONLY and NOT FOR AUTOMATIC TRANSMISSIONS. Reservation Mode must be engaged each and every time you leave your manual transmission car in order to auto-start the vehicle.

Note: The system is not recommended for vehicles with removable tops.

Important Requirements to activate Reservation Mode

CompuStar does not monitor the location of the gear. It is your responsibility to leave the transmission in the neutral position before you remote start. If the reservation is set when the transmission is in gear or if you move the transmission gear after the reservation is set, the engine will start and Firstech will not be responsible for any damages.

??The transmission must be in the NEUTRAL position.

??The vehicle windows must be rolled up.

??Do not set the reservation mode with people in the vehicle.

??Do not use the auto-start with people in the vehicle.

??Do not set the reservation mode if the vehicle has a problematic door pin or dome light system.

Activating Reservation Mode (MANUAL TRANSMISSION ONLY)

Step 1: After arriving at your destination, and BEFORE TURNING YOUR ENGINE OFF, place the transmission in the Neutral position.

Step 2: Remove your foot from the foot brake.

Step 3: Activate the parking brake.

Step 4: Remove the key from the ignition. The engine will remain running.

Step 5: Exit the vehicle and close the door within two minutes after activating the parking brake. The engine will shut off and reservation mode for the remote starter is now complete.

Your vehicle is now ready for auto-starting. However, the reservation mode will be cancelled if the door is opened or the CompuStar system is put in Valet mode after the reservation has been set. Once cancelled, you will have to start the vehicle with the manual key and repeat the above 5 steps if you want to restore reservation mode.

Important! If you try to auto-start the vehicle when reservation mode has not been set or turned on, the auto-start feature will not work. When you press the auto-start button, the remote will beep three times and the vehicle parking lights will flash five times. A couple of seconds later, the cause for the error will be indicated by the number of times the vehicle parking lights flash. See Page 4 for error messages.

Canceling Reservation Mode

If you do not want to set reservation mode, shut off the engine before you exit the vehicle. The engine will shut off for the following reasons:

??You did not activate the parking brake or, you pressed the foot brake when you turned the manual key to the off position.

??You released the parking brake while the engine was running.

??You entered Valet Mode after the Reservation Mode has been completed.

Error Messages

If there is a problem in auto-starting your vehicle, you will hear three chirps when you attempt to auto-start the vehicle. Wait for 2 seconds and the cause for the error will be indicated by the number of times the vehicle parking lights flash.

2WFMRS specifications

The CompuSTAR 2WFMRS is a state-of-the-art remote start and security system designed to provide vehicle owners with advanced car security and convenience. There are several distinguishing features and technologies that make the CompuSTAR 2WFMRS a cutting-edge solution for modern vehicles.

One of the primary features of the CompuSTAR 2WFMRS is its two-way remote start capability. This allows the user to start their vehicle from a significant distance, usually up to 3000 feet away. The two-way communication ensures that the user receives confirmation feedback on the remote when the car successfully starts, making it an ideal choice for cold winter mornings or hot summer days.

Another notable characteristic of the 2WFMRS is its sophisticated security system. It includes a two-way LCD remote that not only allows remote starting but also provides instant notifications of any unauthorized access attempts. Through its advanced technology, it can immobilize the vehicle to prevent theft while alerting the owner, which significantly enhances overall security.

The system is also equipped with a built-in shock sensor, which detects impacts to the vehicle and triggers the alarm if a significant disturbance is detected. This feature is vital for users who park in high-risk areas or urban environments with higher rates of theft or vandalism.

In terms of installation, the CompuSTAR 2WFMRS is designed for a straightforward setup, with compatibility across various vehicle makes and models. It is often recommended to have the system installed by a professional to ensure optimal functionality and integration with the vehicle's existing electronics.

Moreover, the CompuSTAR 2WFMRS features a sleek and rugged remote, enhancing usability while providing a durable design. The remote is not only visually appealing but is also engineered to withstand daily wear and tear, making it an ideal companion for vehicle users.

Additionally, the technology behind the CompuSTAR 2WFMRS utilizes FM and AM frequency bands for improved communication range and reliability. This ensures that users are less likely to experience interference or connectivity issues.

Overall, the CompuSTAR 2WFMRS is an exceptional remote start and security system that combines advanced technology with user-friendly features, making it a popular choice for vehicle owners who prioritize convenience and security. Its design, capabilities, and reliability set it apart in a competitive market. Whether it's for added security or simply the luxury of starting your vehicle from a distance, the CompuSTAR 2WFMRS is engineered to meet the needs of the modern driver.