Cobra Electronics CXT400 Mode/Lock Button To de-program a memory location, Channel Scan

Page 10

Operation

Mode Functions

 

Channel Buttons

3. Press the Talk button to return to Standby

 

mode on the selected memory location.

 

A memory location can be reprogrammed

 

at any time it is displayed. Press the

 

Enter/Hi•Low button to begin.

While recalling a stored memory location, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

Mode/Lock Button To de-program a memory location:

1. Press the Mode/Lock button until the Memory icon and the memory location flash on the display.

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

b. Press the Mode/Lock button to enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions.

While de-programming a memory location, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

Channel Scan

Your microTALK radio can automatically scan channels.

Mode/Lock Button To scan channels:

1. Press the Mode/Lock button until the Scan icon and the channel numbers flash on the display.

Memory Icon

Channel Buttons

2.Press the Channel Up or Channel Down button to select the memory location (0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.

Press the Enter/Hi•Low button. The channel

 

numbers will flash on the display.

4.

Press the Channel Up or Channel Down

Scanning Channels

Channel Buttons

2.Press the Channel Up or Channel Down button to begin scanning channels.

The radio ignores specific privacy codes while scanning channels.

The Scan icon will continue to be displayed when scan is on. Your radio will continue to scan all channels and stop if an incoming transmission is detected. Your radio will remain on that channel for 10 seconds.

Channel 0

button to select Channel 0.

5. Choose one of the following:

a. Press the Enter/Hi•Low button to enter

the channel/privacy code in the selected

memory location and return to the

beginning of memory location options.

While setting channel scan, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel or channel/privacy code displayed before you entered mode functions.

During channel scan (while receiving an incoming transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on that channel. Your radio will remain on that channel and return to Standby mode.

b. Press the Channel Up or Channel Down button to resume scanning channels.

14

15

Image 10 Cobra Electronics CXT400 owner manual Mode/Lock Button To de-program a memory location, Channel Scan
Contents Automated Help Desk Making Life Easier and SaferFor Assistance in the U.S.A Customer Assistance OperatorsPower Inverters Accessories Product FeaturesSafety Information for microTALK Radios Backlit LCD DisplayRechargeable Batteries and Desktop Charger To install or replace batteriesCaring for YourmicroTALKRadio Estimated operation time on full charge 12 hoursAuto Battery Save Using Your RadioBattery Low For charging microTALK radios in desktop chargerListening for a Response Selectable HighLow Power OutputVolume Call ButtonLight/Max Range To briefly turn off auto squelch To turn the lock feature on or offEnter/HiLow Power To turn maximum range extender onSet Ctcss Privacy Codes Mode FunctionsScrolling through Mode Functions Mode/Lock Button To select a Ctcss privacy codeMode/Lock Button To select a DCS privacy code Mode/Lock Button To turn VOX mode on or offStandby mode Mode/Lock Button To listen to All Hazards Radio channelsTo program a memory location Memory LocationsTo recall a stored memory channel location Mode/Lock Button To de-program a memory location Channel ScanIf you press the Talk button while scanning, but more than Privacy Code ScanPress and hold the Talk button to communicate To scan privacy codesMemory Location Scan Call Tone SettingsTo change a call tone setting To scan memory locationsTo turn roger beep on or off Mode Functions General SpecificationsTo change keystroke tones Product Service Questions FCC Licensing Product Service QuestionsSend the entire product Please contact your local dealer for warranty information Warranty and TrademarksLimited One-YearWarranty on Radios & Charger Trademark Acknowledgement