Cobra Electronics CXR950 owner manual Memory Locations, To program a memory location

Page 10

Mode Functions

Operation

10 Memory Locations

•

Your microTALK® radio has 10 Memory Locations for storing your most frequently used channels and channel/privacy code combinations. These Memory Locations can be selected individually or can be scanned. (See page 22 for memory location scan.)

 

 

 

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

 

6. Choose one of the following:

a. Press the Channel Up or Channel Down

button to select a CTCSS privacy code

(01 through 38) for the channel.

b. Press the Lock/Enter button to

Mode Button

Memory Icon

Channel Button

To program a memory location:

1.Press the Mode button until the Memory icon and the memory location flash on the display.

2.Press the Channel Up or Channel Down button to select the memory location (0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

switch from CTCSS to DCS. The DCS

icon and privacy code numbers will

flash on the display. The Channel Up

or Channel Down button can then be

used to select a DCS privacy code

(01 through 104) for the channel.

If “OFF” flashes in place of the privacy code numbers, a privacy code is already set in the opposite (CTCSS

or DCS) system. Press the Channel Up or Channel Down button to cancel

3.Press the Lock/Enter button to enter

a new memory location or edit an already programmed memory location. The channel numbers will flash on the display.

 

4. Press the Channel Up or Channel Down

Lock/Enter Button

button to select a channel (1 through 22).

5. Press the Lock/Enter button.

The CTCSS icon and privacy code numbers will flash on the display.

14

the opposite code and select a privacy code from the active system for the selected channel.

7.Choose one of the following:

a.Press the Lock/Enter button to enter the channel/privacy code in the selected memory location. Radio then proceeds to next Memory location, which will blink.

b.Press the Mode button to

enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions.

c.Press the Talk button to enter the channel/privacy code in the selected memory location and exit mode functions. Upon release of the Talk button, the radio will enter Standby mode on the channel/privacy code just entered.

15

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Automated Help Desk Making Life Easier and SaferFor Assistance in the U.S.A Customer Assistance OperatorsFeatures Backlit LCD Display Warranty and Trademark AcknowledgementProduct Features Trademark AcknowledgementCaring for Your microTALK Radio Avoid exposure to extreme temperaturesReplace battery compartment cover and belt clip Estimated operation time on full charge 12 hoursAuto Battery Save Using Your RadioBattery Low For charging microTALK radios in desktop chargerListening for a Response Time-out TimerChannels Call ButtonAuto Squelch/Maximum Range Lock FeatureRewind-Say-Again Scrolling through Mode Functions Using your Radio and Mode FunctionsMicroTalk Range Set Ctcss Privacy Codes Mode FunctionsPrivacy Codes Set DCS Privacy CodesVoice Activated Transmit VOX To turn VOX mode on or offNOAA* All Hazards Radio Channels To set VOX sensitivityMemory Locations To program a memory locationTo de-program a memory location To recall a stored memory channel locationWhile recalling a stored memory location While de-programming a memory locationTo scan channels Channel ScanYour microTALK radio can automatically scan channels If you press the Talk button while scanning, but more thanPrivacy Code Scan Press the Channel Up or Channel Down button toAfter 10 seconds of inactivity, unit starts scan again Memory Location ScanTo scan memory locations Roger Beep Confirmation Tone Call Tone SettingsVibrAlert and Call Alert Keystroke TonesGeneral Specifications FCC License General SpecificationsProduct Service Product Service Questions
Top Page Image Contents