Cobra Electronics CXR900 NOAA* All Hazards Radio Channels, Voice Activated Transmit VOX

Page 9

Mode Functions

Operation

NOAA* All Hazards Radio Channels

•

You can use your microTALK® radio to listen to NOAA All Hazards Radio channels transmitting in your area.

Mode Button

To listen to All Hazards Radio channels:

 

1. Press the Mode button until the WX (All

Introduction

Operation

Customer Assistance Warranty

Voice Activated Transmit (VOX)

•

In VOX mode, your microTALK® radio can be used “hands-free,” automatically transmitting when you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise.

Hazards Radio) icon, the currently selected All

Hazards Radio channel, and signal strength

are displayed.

Mode Button

To turn VOX mode on or off:

1. Press the Mode button until the VOX icon

flashes on the display. The current on or

Hazards Radio Icon

Channel Button

2.Use the Channel Up or Channel Down button to change All Hazards Radio channels.

3.WX (All Hazards Radio) icon will continue to be displayed when All Hazards Radio is on. Choose one of the following:

a.Press the Mode button to proceed to other functions.

b.Press the Lock/Enter button to exit All Hazards Radio channels mode and return to Standby mode.

VOX Icon

Channel Button

off setting is displayed.

2. Press the Channel Up or Channel Down

button to turn VOX on or off.

3. Choose one of the following:

a. Press the Mode button to enter the

selected on or off setting and proceed

to other functions.

b. Press the Lock/Enter button to enter

the selected on or off setting and return

to Standby mode.

To set VOX sensitivity:

*National Oceanographic and Atmospheric Administration

VOX Sensitivity Level

1.Press the Mode button until the VOX icon flashes and the current sensitivity level is displayed.

The current sensitivity level is displayed with letters “LE” and a Number 01 through 05, with Number 05 being the most sensitive level and Number 01 being the least sensitive level.

2.Press the Channel Up or Channel Down button to change the setting.

3.Choose one of the following:

a.Press the Mode button to enter the selected setting and proceed to other functions.

b.Press the Lock/Enter button to enter the selected setting and return to Standby mode.

12

13

Page 8 Page 10
Image 9
Page 8 Page 10
Contents For Assistance in the U.S.A Making Life Easier and SaferAutomated Help Desk Customer Assistance OperatorsProduct Features Warranty and Trademark AcknowledgementFeatures Backlit LCD Display Trademark AcknowledgementReplace battery compartment cover and belt clip Avoid exposure to extreme temperaturesCaring for Your microTALK Radio Estimated operation time on full charge 12 hoursBattery Low Using Your RadioAuto Battery Save For charging microTALK radios in desktop chargerChannels Time-out TimerListening for a Response Call ButtonLock Feature Auto Squelch/Maximum RangeRewind-Say-Again Using your Radio and Mode Functions Scrolling through Mode FunctionsMicroTalk Range Privacy Codes Mode FunctionsSet Ctcss Privacy Codes Set DCS Privacy CodesNOAA* All Hazards Radio Channels To turn VOX mode on or offVoice Activated Transmit VOX To set VOX sensitivityTo program a memory location Memory LocationsWhile recalling a stored memory location To recall a stored memory channel locationTo de-program a memory location While de-programming a memory locationYour microTALK radio can automatically scan channels Channel ScanTo scan channels If you press the Talk button while scanning, but more thanPress the Channel Up or Channel Down button to Privacy Code ScanMemory Location Scan After 10 seconds of inactivity, unit starts scan againTo scan memory locations VibrAlert and Call Alert Call Tone SettingsRoger Beep Confirmation Tone Keystroke TonesGeneral Specifications General Specifications FCC LicenseProduct Service Questions Product Service
Top Page Image Contents