Cobra Electronics LI 7000WX Call ToneSettings, Keystroke Tones, Roger Beep ConfirmationTone

Page 15

Mode Functions

Operation

10 Call ToneSettings

You can choose from 10 different call tone settings to transmit a unique call alert.

Introduction

Operation

Customer Assistance Warranty

Keystroke Tones

With Keystroke Tones turned on, your radio will sound beeps each time you press a button or change a setting.

Mode Button

Call Tone Setting

Channel Buttons

To change a call tone setting:

1.Press the Mode button until the

letter “C” and the current call tone number (01 through 10) is displayed.

2.Press the Channel Up or Channel Down button to hear the other call tone settings.

3.Choose one of the following:

a.Press the Mode button to enter the new setting and proceed to other functions.

b.Press the Lock/Enter button to enter the new setting and return to Standby mode.

Mode Button

Keystroke Tones On

Channel Buttons

To change keystroke tones:

1.Press the Mode button until the Keystroke Tones icon flashes on the display. The current on or off setting is displayed.

2.Press the Channel Up or Channel Down button to turn keystroke tones on or off.

3.Choose one of the following:

a.Press the Mode button to enter the new setting and return to Standby mode.

b.Press the Lock/Enter button to enter the new setting and return to Standby mode.

Roger Beep ConfirmationTone

Roger Beep is an audible tone that your listener will hear when you release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak.

Mode Button

Roger Beep On

Channel Buttons

To turn roger beep on or off:

1.Press the Mode button until the

Roger Beep icon flashes on the display. The current on or off setting is displayed.

2.Press the Channel Up or Channel Down button to select roger beep on or off.

3.Choose one of the following:

a.Press the Mode button to enter

the new setting and proceed to other functions.

b.Press the Lock/Enter button to enter the new setting and return to Standby mode.

24

25

Image 15
Contents Customer Assistance Operators Making Life Easier and SaferFor Assistance in the U.S.A Automated Help DeskTrademark Acknowledgement Product FeaturesWarranty and Trademark Acknowledgement Limited One-Year Warranty on Radios & ChargerEstimated operation time on full charge 12 hours Avoid exposure to extreme temperaturesReplace battery compartment cover and belt clip Caring for YourmicroTALK RadioFor charging microTALK radios in desktop charger Using Your RadioBattery Low Auto Battery SaveTo Illuminate Display To switch from high to medium to low powerListening for a Response Call Button To alert another person that you are callingMicroTALK Range Lock FeatureSignal Strength Meter Auto Squelch/Maximum RangeSet Ctcss Privacy Codes Mode FunctionsScrolling through Mode Functions Privacy CodesNOAA* All Hazards Radio Channels Standby modeSet DCS Privacy Codes To select a DCS privacy codeMemory Locations Voice Activated Transmit VOXWhile recalling a stored memory location Press the Mode button toChoose one of the following To recall a stored memory channel locationTo de-program a memory location Channel ScanTo scan channels Select Channel To scan privacy codes Press the Mode button to proceed to set privacyPress the Channel Up or Channel Down button to Privacy Code ScanTo scan memory locations Memory Location ScanVibrAlert and Call Alert To change call settingsCall ToneSettings Keystroke TonesRoger Beep ConfirmationTone General Specifications General Specifications FCC LicenseProduct Service Questions Product Service