Cobra Electronics MT 725 manual Ctcss Privacy Code Scan, To Scan Privacy Codes

Page 11

MODE FUNCTIONS

English

If you press the TALK button while scanning and not within ten (10) seconds of receiving a transmission, you will transmit on the channel on which you last received a transmission. This will return the radio to LISTENING MODE. If you do not press any button within ten (10) seconds, your radio will automatically resume scanning channels.

During Scanning (while not receiving a transmission), You Can Choose From The Following:

a. Press and hold the TALK button to communicate on either the channel or channel/privacy code that was displayed before you entered Mode Functions or the channel on which, during scanning, you last received a transmission. This will return the radio to LISTENING MODE.

b. Press the MODE button to proceed to set CTCSS privacy code on the channel that was either displayed before you entered Mode Functions or on which, during scanning, you last received a transmission (see “CTCSS Privacy Code Scan” for further details).

c. Press the LOCK button to return to LISTENING MODE on either the channel or channel/privacy code that was displayed before you entered Mode Functions or the channel on which, during scanning, you last transmitted or received.

CTCSS Privacy Code Scan

Your microTALK® radio can automatically scan the CTCSS

privacy codes (01 to 38) within one (1) channel.

Select Channel

 

To Scan Privacy Codes:

 

1.While in LISTENING MODE, press the CHANNEL UP or CHANNEL DOWN button to choose the channel on which you wish to scan the CTCSS privacy codes.

2.Press the MODE button until the Scan icon and the small numbers next to the channel number flash on the display.

3.Press the CHANNEL UP or CHANNEL DOWN button to begin scanning CTCSS privacy codes within the channel you selected.

The Scan icon will continue to be displayed when CTCSS privacy code scan is On. Your radio will continue to scan CTCSS privacy codes and stop as an incoming transmission is detected. Your radio will remain on that channel/privacy code for ten (10) seconds.

Mode Button

Select Scan Privacy Codes

Channel Buttons

While setting CTCSS privacy code scan, if you do not press any buttons for fifteen (15) seconds your radio will automatically return to LISTENING MODE on the

channel/privacy code that was displayed before you entered Mode Functions.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents English Caring for Your Radio Product FeaturesProduct Information Replace Battery Compartment cover and belt clip Battery InstallationBattery Pack Charging To Install or Replace BatteriesPlace the Radio in the charger base Optional Battery ChargingTo Recharge the Rechargeable NiMH Battery Pack Electrical socketCommunicating with Another Person Radio PowerBattery Low Indicator Battery/Power SaverLock Function VolumeCall Button ChannelsTo Turn Maximum Range Extender Off Auto Squelch/Maximum Range ExtenderMicroTALK Range Seconds Intercom Scrolling Through the Mode Functions External Speaker/ Microphone Jack To Select a Privacy Code To Turn VOX Mode On or OffCtcss Privacy Codes Voice Activated Transmit VOXTo Scan Channels Channel ScanTo Set the VOX Sensitivity Level To Scan Privacy Codes Ctcss Privacy Code ScanVibrAlert and Call Alert To Change Call SettingsTo Turn Baby Monitor On Enter Baby Monitor ModeBaby Monitor Choose one of the following Select or edit a channel Dual WatchWatch To Turn Dual Watch OnChoose one of the following Call Tone SettingsTo Change a Call Tone Setting To terminate Dual WatchDo not press any buttons for fifteen 15 seconds Roger Beep Confirmation ToneKeystroke Tones To Turn Roger Beep On or OffDeclaration of Conformity Optional Accessories
Top Page Image Contents