MOD E FUN Ctions Operation

English

Scrolling Through the Mode Functions

By scrolling through the Mode Functions, you will be able to select or change preferred features of your microTALK® radio. While you are scrolling through the Mode Functions, your radio features will be displayed in the same predetermined order:

Set CTCSS Privacy Codes

Set DCS Privacy Codes

Set VOX On/Off

Set VOX Sensitivity Level Set Channel Scan

Set CTCSS Privacy Code Scan

Set DCS Privacy Code Scan Set Call Tones

Set “Roger Beep” On/Off

CTCSS Privacy Codes

CTCSS (Continuous Tone Coded Squelch System) is an advanced tone coding system allowing you to select one of 38 privacy codes to reduce incoming transmissions from other users on the channel.

NOTE: If you are using a privacy code, both radios must be tuned to the same channel and privacy code to communicate. Each channel will remember the last privacy code you selected.

To Select a CTCSS Privacy Code:

1.After selecting a channel, press and release the MODE button until the CTCSS icon flashes on the display. In addition to the CTCSS icon, either OFF or the small numbers next to the channel number will flash on the display.

2.If CTCSS and OFF are flashing, press the CHANNEL UP or CHANNEL DOWN button to exit OFF and proceed to select a privacy code; or, if CTCSS and the small numbers next to the channel number are flashing, press the CHANNEL UP or CHANNEL DOWN button to select a privacy code.

3.When your desired privacy code is displayed, choose one of the following:

a.Press the MODE button to enter the new setting and proceed to other functions.

b.Press the LOCK button to enter the new setting and return to LISTENING MODE.

c.Do not press any buttons for 15 seconds to enter the new setting and return to LISTENING MODE.

Mode Button	CTCSS OFF
Select Privacy Code	Channel Buttons