Cobra Electronics PR4800WXC Choose one of the following, To other functions, Standby mode

Mode Functions

Operation

Introduction Operation Customer Assistance Warranty

Set DCS Privacy Codes

•

Mode/Lock Button	To select a DCS privacy code:
	1. After selecting a channel, press the Mode/Lock
	button until the DCS icon appears and the
	small numbers flash on the display
DCS Privacy Code	(01 through 83).

Hazards Radio Icon

3. The All Hazards Radio icon will continue to

be displayed when All Hazards Radio is on.

Choose one of the following:

a. Press the Mode/Lock button to proceed

to other functions.

b. Press the Enter/Hi-Lowbutton to exit

All Hazards Radio channel mode and

If CTCSS is turned on at the channel selected, the display will flash the DCS icon and “OFF.” To switch from CTCSS to DCS, press the Channel Up or Channel Down button while the display is flashing “OFF.” The display will then show the small numbers flashing and you will then

Enter/Hi-Low Button

return to Standby mode.

c. Press Talk button to exit and start on

last used transmitting channel.

*National Oceanographic and Atmospheric Administration

be able to proceed to step 2.

Voice Activated Transmit (VOX)

•

2.	Press using the Channel Up or Channel Down
	button to select a DCS privacy code. You can
	hold the Up or Down button for fast advance.
3.	When your desired DCS privacy code is

In VOX mode, your microTALK radio can be used “hands-free,” automatically transmitting when you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise.

displayed, choose one of the following:

a. Press the Mode/Lock button to enter the

new setting and proceed to other functions.

b. Press the Enter/Hi•Low button to enter the

new setting and return to Standby mode.

c. Do not press any buttons for 15 seconds

to enter the new setting and return to

Standby mode.

NOAA* All Hazards Radio Channels

•

You can use your microTALK radio to listen to NOAA All Hazards Radio channels transmitting in your area.

Mode/Lock Button To listen to All Hazards Radio channels:

1. Press the Mode/Lock button until the All Hazards Radio icon, the currently selected All Hazards Radio channel, and signal strength are displayed.

2.Use the Channel Up or Channel Down button to change All Hazards Radio channels.

Mode/Lock Button

VOX Icon

Channel Buttons

To turn VOX mode on or off:

1.Press the Mode/Lock button until the VOX icon flashes on the display. The current on or off setting is displayed.

2.Press the Channel Up or Channel Down button to turn VOX on or off.

3.Choose one of the following:

a.Press the Mode/Lock button to enter the selected on or off setting and proceed to other functions.

b.Press the Enter/Hi•Low button to enter the selected on or off setting and return to Standby mode.

To set VOX sensitivity:

1.Press the Mode/Lock button until the VOX icon flashes and the current sensitivity level is displayed.

10English

Nothing Comes Close to a Cobra® 11