45WX.MANUAL.9/97.qx 9/26/97 2:39 PM Page 15
OPERATIONS
MEMORY CHANNELS/MEMORY CHANNEL SCAN
14
MEMORY CHANNELS
Recall eight of your most used channels.
Saving Channels in Memory
Select desired channel to store in
memory. | M. |
|
Press Function key once. The F icon will appear.
Press and hold the desired memory location key. The M icon will appear with the corresponding memory location number.
**Note: There are four memory locations as indicated on the key pad; F/M1, F/M2, F/M3, F/M4. There are four additional memory locations available; F/Lock, F/Light, F/Channel Up, F/Channel Down.
Retrieving Channels from Memory
Press the Function key.
Press and release the desired memory location key.
MEMORY CHANNEL SCAN
Be sure your squelch is set to the Desired
Squelch Setting (DSS). (See pp 9)
Press and release the Function key.
Press and release the M.SC key.
The 45WX will stop scanning and | M. |
monitor a memory channel when it |
|
receives an incoming transmission. Five |
|
seconds after the transmission stops, the |
|
45WX will continue scanning. |
|
**Note: At anytime you can stop scanning by pressing another key on the 45WX.
OPERATION
FREQUENCY DISPLAY/IN VEHICLE USE
15
5 DIGIT FREQUENCY DISPLAY
Your 45WX has the capability to display the frequency of the channel you selected.
Push and hold the function key for approximately 3 seconds.
To switch back to channel readout, | M. |
| |
push and hold the function key until |
|
the display changes. |
|
IN VEHICLE USE
Your 45WX can be connected to a 12 volt power source with the cigarette power cord adaptor provided. Connect adaptor
as shown.
M.
**Note: Due to the characteristics of CB transmissions, it may be difficult to transmit and receive from inside your car with
antenna provided. Roof mounted antennas can dramatically improve transmissions and will increase your range. You will need a quality roof mount antenna and a BNC/SO239 adapter. See accessories section for details.