BT 6196 manual Message back from the receiving radio, Adjust volume as required

Page 19

6196 BT Fway Pro Tw UG [2] 4/6/04 10:17 am Page 19

BT Freeway Pro Twin – Issue 02 – Edition 02 – 04.06.04 – 6196

 

 

Using your mobile radios

19

 

 

 

 

 

3.

Switch your radio ON keeping the volume low.

 

 

 

4.

The display on your radio will show VOX.

 

 

 

5.

Insert earpiece into your ear.

 

 

 

 

Speak into the microphone on the headset. After a short

How to use the headset

 

 

delay your voice will be detected and your message will

The earclip, attached to the

 

 

be sent. When you stop talking you will be able to receive

headset, can be twisted to allow the

 

 

headset to be worn in either ear.

 

 

a message back from the receiving radio.

It is important to secure the earclip

 

 

 

 

 

Adjust volume as required.

before using the headset.

 

 

 

 

 

 

 

Step 1

 

Sensitivity level (using your Freeway headset)

During Vox operation, you can change the sensitivity level to suit the environment in which you are using your radio. This will help minimise the risk of unintended noises triggering a transmission and help pick up soft voices.

1.Press button 4 times. The display will show the current sensitivity level (flashing) along with E.

2.Press or to select the sensitivity level:

1 – Low sensitivity, for noisy environments.

2 – Medium sensitivity, for most environments.

3 – High sensitivity, for quiet environments.

Slide the earclip along the headset moulding until it feels secure.

Step 2

Position earclip over ear as shown.

Image 19
Contents User Guide Welcome… Dual charging unit This guide Getting started Install the batteriesYour BT Freeway Pro Twin radios are ready for use Attaching the belt clip optional Radio controls Getting to know your radioDisplay Talking and listening Using your mobile radiosSwitching the radio power on With the radio switched onUse To select a channel from 1 to Switching key lock off Switching key lock onPress and hold PTT Is receiving. When the other radio user has finished To change the call tone To send a call tonePress , the icon is displayed Roger tone When the channel you want to remove is being scannedTo switch the tone on To switch the tone offVOX using the handset With VOX active Using a Freeway headsetSensitivity level using your Freeway headset Adjust volume as requiredMessage back from the receiving radio Using your mobile radios Help Help General information Safety and generalEnvironmental Technical information Mobile radio channel frequency chart Channel numberGuarantee BT products please call 0870 240 BT Accessories and replacement itemsDeclaration of Conformity Offices worldwide