Binatone 100 Auxiliary Features, Effective Range, Channel Frequency Table, Safety, Specifications

Page 2

4. Auxiliary Features

4.1 Power Saving

Your PMR unit has special circuitry designed to extend the life of your battery. When the unit is not used for 6 seconds, it will automatically switch into a low power mode.

The Power Saving feature does not affect the PMR’s ability to receive transmissions. When a signal is detected, it automatically returns to full power mode.

4.2 Low Battery Indicator

The PMR can detect when the battery charge level gets low. An alert tone will be heard and the RED LED indicator will flash once every 15 seconds. When this happens, replace the batteries.

Important:

For regular batteries, replace only with "AAA/LR03" or

equivalent type.

For rechargeable batteries, replace only with the same type

and make of rechargeable batteries.

5. Effective Range

The Transmission range of the product is dependent on the environment terrain where it is being used, the following diagram attempts to guide the user on the sort of performance to expect for everyday use.

Channel Frequency Table

Channel

Frequency (MHz)

Channel

Frequency (MHz)

 

 

 

 

1

446.00625

5

446.05625

2

446.01875

6

446.06875

3

446.03125

7

446.08125

4

446.04375

8

446.09375

7. Safety

CAUTION

Damaged Antenna

Do not use any PMR that has a damaged antenna. If a damaged antenna comes in contact with the skin, a minor burn may result.

Batteries

All batteries can cause property damage and/or bodily injury such as burns if conductive material such as jewelry, keys, or beaded chains touch exposed terminals. The material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects.

WARNING

For Vehicles with an Air Bag

9. Guarantee and service

The Binatone Latitude 100 is fully guaranteed for 12 months from the date of purchase shown on your sales receipt. The guarantee does not cover damage by misuse or negligence, or by excessive voltage.

Please keep your sales (till) receipt - this is your guarantee. You should also keep the original packaging materials.

When unpacking your Binatone Latitude 100, check for visible damage. If \ you see any damage, do not use the PMR - return the whole unit to where you bought it.

If your Binatone Latitude 100 develops a fault, refer to the “Troubleshooting Guide.” section of this manual. If you can’t solve the problem, return the whole unit as follows;

Latitude 100

Latitude 100

Repair after the Guarantee has expired

If the unit is no longer covered by Guarantee, first follow steps 1 as for

repair under Guarantee, Then...

2. Call our service Department on 0845 345 9677 and ask for a

quotation of the repair charge, and details of where to send your

10. Troubleshooting Guide

Symptom

Solution

 

 

No power.

Check the batteries are installed properly.

 

The batteries may be weak.

 

 

Replace the old batteries with new ones.

 

 

 

Reception

Press the

(UP) button to increase the receiver volume level.

is weak.

The receiving signal may be weak and/or out of range.

 

 

 

Cannot change

To change channels, press the

(Menu) button once then press

channels.

the (UP)

or

(DOWN) buttons to change the current channel.

 

Batteries may be weak.

 

 

 

 

Range is limited.

Batteries may be weak.

 

 

Replace with new batteries if the battery charge level is low.

 

(The RED LED indicator is flashing once in every 15 seconds.)

 

The maximum range will vary depending on terrain and environment,

 

and depending on the TX power high/low setting.

 

Open fields provide the maximum range, while steel/concrete

 

structures, heavy foliage, and use in buildings and in vehicles

 

may limit the range significantly.

 

 

Wearing the radio close to the body, such as in a pocket or on

 

a belt, will decrease range; change the location of the radio.

 

 

Sound distortion

If you are transmitting, speak in a normal tone of voice, 5 cm

problems.

away from the Mic (microphone.).

 

 

If you are receiving, lower the volume to a comfortable level.

 

Radios too close. Radios must be at least 1.5 meters apart;

Signal Strenght

0 Range (Km) 3

Optimum (open area) (1)

Medium ground based obstruction (2)

Heavily built up area (3)

Range Slope

Do not place your PMR in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a PMR is placed in the air bag deployment area and the air bag inflates, the PMR may be propelled with great force and cause serious injury to the occupants of the vehicle.

Potentially Explosive Atmospheres

Turn your PMR OFF when in any area with a potentially explosive atmosphere, unless it is a type especially qualified for such use (for example, Factory Mutual Approved). Sparks in such areas could cause an explosion or fire resulting in injury or even death.

Batteries

Latitude 100 for repair.

3. Return your Latitude 100 to the address given by the Service

Department, making sure to include your name and address, and a

cheque or postal order for the value of the repair charge.

This does not affect your statutory rights.

Binatone Telecom plc operates a policy of continuous product improvement, and so reserves the right to make changes to the product and functions without prior notice.

This equipment is intended for use in:

increase your distance.

Radios too far apart. Obstacles interfere with transmission.

Talk range is up to 3 Km in clear unobstructed conditions.

Range Check

The Transmission range will be affected as shown in the above diagram. The transmitting range typical values for different environment conditions will be (1) 3 km (2) 1.5 km (3) 750m. It should be remembered that these are only guide values as actual achieved distances will be dependent on the environment and terrain.

6. Specifications

Channels Available

8 Channels

 

 

Output Power (TX)

0.5W

 

 

Range

Up to 3 Kms.

 

 

Do not replace or charge batteries in a potentially explosive atmosphere. Contact sparking may occur while installing or removing batteries and cause an explosion.

Blasting Caps and Areas

To avoid possible interference with blasting operations, turn your PMR OFF near electrical blasting caps or in a “blasting area” or in areas posted: “Turn off the two- way radio.” Obey all signs and instructions.

NOTE: Areas with potentially explosive atmospheres are often, but not always, clearly marked. They include fueling areas such as below deck on boats; fuel or chemical transfer or storage facilities; areas where the air contains chemicals or particles, such as grain, dust, or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.

8. Cleaning and Care

To clean your PMR, use a soft cloth dampened with water. Do not use cleaners or solvent, which may cause damage that may not be covered by guarantee.

Austria

Finland

Latvia

Spain

Belgium

France

Liechtenstein

Sweden

Bulgaria

Germany

Luxemburg

Switzerland

Croatia

Greece

The Netherlands

Turkey

Cyprus

Hungary

Norway

UK

Czech

Iceland

Poland

Romania

Denmark

Ireland

Portugal

 

Estonia

Italy

Slovenia

 

Countries of use

Declaration of Conformity

The Binatone Latitude100 complies with the essential requirements

And conforms to the following relevant standards:

Waste electrical products must not be disposed of with household waste. This equipment should be taken to your local recycling centre for safe treatment.

Binatone Telecom plc operates a policy of continuous product improvement, and so reserves the right to make changes to the product and functions without prior notice.

Binatone Help Line - 0845 345 9677

Binatone Help Line - 0845 345 9677

Binatone Help Line - 0845 345 9677

BTP Ver 3, Mar 07

Image 2
Contents LCD Screen InstallationOperation Troubleshooting Guide Symptom Solution Auxiliary FeaturesSafety Specifications
Related manuals
Manual 2 pages 26.04 Kb