3Com 8913H, 8916, 8912H, 8755H Remote control, Putting batteries, About the remote control signal

Page 12
Holding the hook part of the battery cover, remove it.

Remote control

Remote control

Putting batteries

Please set the batteries to the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place.

1.

2. Align and insert the two AA batteries (HITACHI MAXELL, Part No.LR6 or R6P) according to their plus and minus terminals

as indicated in the remote control.

3. Replace the battery cover in the direction of the arrow and snap it back into place.

WARNING ►Always handle the batteries with care and use them only as directed. Improper use may result in battery explosion, cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.

•Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do not mix a new battery with used one.

•Make sure the plus and minus terminals are correctly aligned when loading a battery.

•Keep a battery away from children and pets.

•Do not recharge, short circuit, solder or disassemble a battery.

•Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place.

•If you observe battery leakage, wipe out the leakage and then replace a battery. If the leakage adheres to your body or clothes, rinse well with water immediately.

•Obey the local laws on disposing the battery.

About the remote control signal

The remote control works with the projector’s remote sensor. This projector has a remote sensor on the front. The sensor senses the signal within the following range when the sensor is active:

60 degrees (30 degrees to the left and right of the sensor) within 3 meters about.

Approx.

3 m 30º 30º

NOTE • The remote control signal reflected in the screen or the like may be available. If it is difficult to send the signal to the sensor directly, attempt to make the signal reflect.

•The remote control uses infrared light to send signals to the projector (Class 1 LED), so be sure to use the remote control in an area free from obstacles that could block the remote control’s signal to the projector.

•The remote control may not work correctly if strong light (such as direct sun light) or light from an extremely close range (such as from an inverter fluorescent lamp) shines on the remote sensor of the projector. Adjust the position of projector avoiding those lights.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents Contents of package Fastening the lens coverPart names ProjectorHOT Control panel Rear panel &9Control port USB port Cb/Pb, Cr/Pr ports Video port Audio IN3 L,R ports 11 13 10Remote control Setting up ArrangementOn a horizontal surface Suspended from the ceiling Arrangement Connecting your devices MonitorVCR/DVD PlayerConnecting your devices About Plug-and-Play capabilityConnecting power supply Using the security bar and slotAC inlet Power cord Anti-theft chain or wire Security slot Security barRemote control About the remote control signalPutting batteries Changing the frequency of remote control signal Using as a simple PC mouse & keyboardMouse right button Press Reset button Mouse left button Press Enter buttonPower on/off Turning on the powerTurning off the power Adjusting the volume Selecting an input signalPress Mute button on the remote control OperatingSearching an input signal Selecting an input signal For a computer signal  For no signalAdjusting the projectors elevator Adjusting the zoom and focusFocus ring Using the automatic adjustment feature Adjusting the position For a video signal and s-video signal  For a component video signalUsing the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenFreeze button Blank buttonUsing the menu function ESC button Reset buttonEasy Menu Menu buttonUsing the menu function Advanced MenuAdvanced Menu Picture Mode AspectAuto KeystoneEasy Menu Picture menu GammaPicture menu Color TempLOAD-1, LOAD-2, LOAD-3, LOAD-4 MY MemorySAVE-1, SAVE-2, SAVE-3, SAVE-4 For a computer signal For no signalImage menu Over ScanPhase Auto AdjustImage menu SizeInput menu ProgressiveVideo NR Color SpaceInput menu Video FormatFrame Lock Resolution For some pictures, this function may not work wellSetup menu Setup menu Standby ModeMonitor OUT Volume Audio menuSpeaker AudioUsing the /// buttons adjusts the menu position Screen menuBlank Screen menu Start UPMyScreen Capturing error has occurred. Please try again MyScreen registration is finishedMyScreen Lock MessageSource Name TemplateOption menu Auto SearchAuto on Option menu Auto OFFLamp Time Service MY ButtonMY Source Ghost Filter MessageFactory Reset KEY LockRemote Freq InformationUsing Security Features Inputting the PasswordChanging the Password SecurityUsing the MyScreen Password Function If you have forgotten your PasswordTurning on the MyScreen Password Function Setting the PasswordUsing the PIN Lock Function Turning the Password offDescription Security Registering the PIN CodeTurning Off the PIN Lock Function If you have forgotten your PIN CodeUsing the Transition Detector Function Setting the Transition Detector PasswordTurning On the Transition Detector Function Setting the Transition Detector off Using the MY Text Password function Writing the MY TextDisplaying the MY Text Description Turning on the MY Text Password Closed Caption menu DisplayMode ChannelMaintenance Replacing the lampType number 456-8755H Replacing the lamp Lamp coverLamp warning Replacing the lampCleaning and replacing the air filter Type number MU05611Cleaning and replacing the air filter Caring for the cabinet and remote control Other careInside of the projector Caring for the lensTroubleshooting Related messagesRegarding the indicator lamps Resetting all settings Shutting the projector downElectrical power cord is not plugged Signal cables are not correctly connectedSignal source does not correctly work Input changeover settings are mismatchedVolume is adjusted to an extremely low level AUDIO/SPEAKER setting is not correctMute function is working Lens cover is attachedColor settings are not correctly adjusted Color Space setting is not suitableNot properly adjusted Whisper function is workingSpecifications Specifications913H 916Specifications 270100 112 Unit mm

8755H, 8916, 8913H, 8912H specifications

3Com has long been known for its innovative networking solutions, and the 3Com 8912H, 8913H, 8916, and 8755H are prime examples of the company's commitment to high performance and versatility in networking technology. Each of these switches is engineered to meet the demanding requirements of modern network environments, providing robust functionalities designed for enterprise use.

The 3Com 8912H is a high-performance switch that offers 12 ports, allowing for efficient connectivity in medium-sized networks. One of its standout features is its support for Quality of Service (QoS), which prioritizes data traffic to enhance voice and video applications, ensuring minimal latency and jitter. Additionally, it includes advanced Layer 2 switching capabilities, enabling the management of bandwidth and improving network efficiency. Its ability to handle packet filtering and VLAN support allows for the segmentation of network traffic, enhancing both security and performance.

The 3Com 8913H extends the capabilities of the 8912H with 24 ports, making it ideal for growing organizations that require scalable networking solutions. Built with high availability in mind, the 8913H includes redundancy features that minimize downtime. It also supports Power over Ethernet (PoE), enabling the delivery of power to connected devices like IP phones and wireless access points directly through the network cable. This feature not only simplifies the installation of these devices but also enhances network management.

The 3Com 8916 is a more robust model, providing 16 ports and advanced Layer 2 and Layer 3 features. Its intelligent networking capabilities, such as static routing and dynamic management features, make it a suitable choice for larger networks. The switch supports stacking capabilities, allowing multiple units to operate as a single logical unit. This capability enhances management simplicity and scalability while providing redundancy and load balancing for even greater reliability.

Lastly, the 8755H switch stands out due to its ability to deliver high bandwidth and performance for large data center environments. It features a modular design, enabling the deployment of various interface modules to support different network requirements. This flexibility, combined with extensive manageability options, allows the 8755H to adapt to evolving network needs. Its robust security features safeguard the network against unauthorized access and attacks, making it a core component in secure enterprise architectures.

In summary, the 3Com 8912H, 8913H, 8916, and 8755H switches embody a comprehensive suite of networking features designed for efficiency, scalability, and security. They showcase 3Com's commitment to providing high-quality, reliable networking solutions that meet the diverse needs of businesses in an ever-evolving digital landscape.
Top Page Image Contents