Audiovox AXT240 specification

To Transmit

1.Set the desired channel.

2.Press and hold the P (Push-to-Talk) button while speaking slowly and clearly in a normal voice, approximately 2 to 3 inches from the microphone.

3.The transmit indicator will illuminate while transmitting.

4.Release the P (Push-to-Talk) button when you finish speaking to receive incoming signals.

To Receive.

1.Set the desired channel and CTCSS code.

2.Adjust the volume control to the desired listening volume by using the up and down buttons while observing the volume indicator on the display

3.The transceiver will play strong signals through its internal speaker or through a headset if so equipped.

Monitor Function

The monitor button can be used to play all signals present on a channel. This is useful when communicating with other parties at extreme range.

The monitor function can be locked on by pressing its button for three seconds. A confirmation tone indicates that the monitor lock has been activated. Pressing either the call, P (Push-to-Talk) or monitor buttons will unlock the monitor function.

-10-