Audiovox FR5312 specifications Battery Installation

Page 8

BATTERY INSTALLATION

Your FR-531-2 requires four AAA alkaline cells. Alkaline batteries will provide the best performance from your transceiver. Remove the battery cover by rotating the carry clip away from the battery compartment. Slide the bat- tery cover downward while applying pressure at the embossed arrow. Observe the polarity symbols inside the battery tray when install- ing the batteries.

CLIPEMBOSSED

RELEASEARROW LATCH

BATTERY

COVER

CAUTION:

Incorrect battery installation can damage the unit.

The EAR MIC jack is intended for use with Audiovox approved ear mi- crophone/headset, while the CHG jack is not used.

-8-

128-6255A

8 of 16

Image 8
Contents Model FR-531-2 Two Way Family Radio Congratulations on Your Selection FR-531-2 Family Radio Read this Manual CarefullyFeatures Performance FCC WarningFunction and Location of the Controls Charger CHG Jack Not Used Charging Contacts Not Used Carry Clip Battery Compartment Speaker MicrophoneFixed Antenna LCD Display and Operation VOXBattery Installation Using Your FR-531-2 Turning the Transceiver On and OffVOX Function FunctionsRoger Beep Tone Keylock Function Channel ScanningCall Function Monitor Function To TransmitTo Receive 128-6255A Specifications Channel Frequencies MHzDAY Limited Warranty 128-6255A