Button Beep (Key Tone)
This feature allows the transceiver to sound a confirmation tone whenever the following keys are pressed: Monitor (M) Button, Up/Down Buttons, Func- tion Button, SCAN Button or the EMG Button.
To turn the key tones on or off:
-From GMRS/FRS standby mode, press the MODE Button six times until bP,
the Bell ( 
) icon, and On or oF flash on the LCD display.
-Press the Up or Down Button to toggle the key tone feature On or Off.
-Press the PTT or PWR button momentarily to confirm selection. When the key tone feature is on, the Bell icon appears steady on the display, and the beep tones sound in response to button activation.
Roger Beep Tone
The Roger Beep is a tone which is automatically transmitted whenever the PTT button is released. This tone alerts the receiving party that the trans- mission has been terminated intentionally.
To enable and disable the Roger Beep tone:
-From GMRS/FRS standby mode, press the Function (F) Button 7 times until rb appears on the display with the flashing Roger Beep icon ( 
) and On or oF.
-Press the Up or Down Button to select the tone on or off as desired.
-When enabled, the tone icon ( 
) appears steady on the display.
-Press the PTT or PWR button momentarily to confirm selection.
Call Ringer Selection Mode
The transceiver provides 5
To select your favorite call ringer melody:
-From GMRS/FRS standby mode, press the Function (F) button 8 times; CA will appear on the display, together with a flashing number (or oF) between 01 and 05, and an appropriate call ring.
15