NOTE: You can use the scan tune (S ) function to more quickly establish the preset station frequencies.
5.Press the left menu button until 1 begins to flash again; then press the Up (6) button to increment the preset to number 2 which also flashes.
6.Repeat steps 4 and 5 to establish the second preset station frequency.
7.Repeat step 6 to increment the preset number to 3 and repeat steps 4 and 5.
8.Continue with presets 4 through 9 as indicated.
9.Press the right menu button, scrolling through S, T and MEM; then press again to access OFF or WAY.
10.If OFF appears flashing, and you wish to turn off FM radio reception whenever other modes are being used, press the Monitor (M) button to confirm. If WAY is flashing, and you wish to continue FM radio reception while other modes are being used, press the Monitor (M) button to confirm.
NOTE: When WAY is selected, FM broadcast can be heard in all modes except for Weather band. During FRS transmission and reception, the FM program is interrupted and will resume when transmission or reception ends.
WEATHER MODE
NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION (NOAA) RECEIVER MODE
NOAA provides transmitters which are located throughout the United States; these transmitters broadcast National Weather Service warnings, watches forecasts and hazard information 24 hours a day.
The NOAA receiver on the
NOAA WEATHER MENU
To access the NOAA channel menu:
1.From the FRS TWO WAY mode (CH and CODE displayed), press the Function
(F) button twice; WEATHER is momentarily displayed, followed by the WEA and channel indication
2.Press the right menu button; the channel number flashes.
3.Press the Up button (6) or the Down button (11) to select the strongest of the 10 channels.
4.Press the Monitor (M) button to confirm channel selection.
15