Roger Beep Tone
The Roger Beep is a tone which is automatically transmitted whenever the PTT button is released and the tone is enabled. This tone alerts the receiving party that the transmission has been terminated intentionally.
To enable and disable the Roger Beep tone:
-From GMRS standby mode, press the MODE Button 4 times (in FRS mode, 3 times) until the flashing Roger Beep icon ( 
) appears with On or oF.
-Press the Up or Down Button to select the tone on or off as desired.
-When enabled, the tone icon ( 
) appears steady on the display.
-Press the PTT button momentarily to confirm selection.
VOX Selection Mode
This option enables you to have
To set the radio for VOX operation:
-From GMRS/FRS standby mode, press and hold the MODE button for 3 seconds, or until the VOX icon appears on the display.
-To terminate VOX operation, press and hold the MODE button for at least 3 seconds; the VOX indication will disappear.
Button Beep (Key Tone)
This feature allows the transceiver to sound a confirmation tone whenever the following keys are pressed: Power On/Off/SCAN Button, Up/Down But- tons and MODE Button. This feature is always on.
16
16 of 28