Call Ringer Selection Mode
The transceiver provides 3
To select your favorite call ringer melody:
-From GMRS/FRS standby mode, press the MODE Button 8 times (7 times for FRS). CA will appear on the display, together with a flashing number between 1 and 3, and an appropriate call ring.
-Press the Up or Down Button to preview and hear the 3 available call melodies.
-Press the PTT button momentarily to confirm selection.
Channel Scan Operation
This feature allows you to monitor all channels automatically for valid signals. While scanning, you can transmit and receive. When a signal is received, the scan is interrupted and will return to scan mode 5 seconds after reception is terminated.
NOTE: While the scan function is active, the MODE button will be inoperative. The scan mode will reduce overall battery life since the battery save function is overridden.
To enable the channel scan mode:
- From GMRS/FRS standby mode, momentarily press the power But- ton; ( 
) will appear on the LCD display.
-The radio will display each channel
-If the unit doesn’t find any signals and you want to transmit, press the PTT button to return to home channel operation. The channel number will flash and the transceiver will then automatically resume scanning approximately 15 seconds after the communication is completed.
-If there is no activity and you want to leave the scan mode, press the
power button momentarily and the unit will return to normal operation;
the 
icon will disappear from the LCD display.
16
16 of 28