Charging Indications
When either, or both, units are being charged in the charging stand, the associated red LED charging indicator will light steadily. In addition, the AC wall adapter LED will also light steadily. When fully charged, the LEDs will be off.
GMRS762CH Operational Modes
Controls:
LED Flashlight Enable Button (2)
When the unit is on, press this button on the left side of the Trans- ceiver to light the white flashlight LED (10) on top of the unit.
Power On-Off/SCAN (8) Button
Press and hold the power on/off button ( 
s
) for at least 2 seconds.
You will hear a confirming melody to indicate the unit is on. To turn the unit off, press and hold the button for at least 2 seconds. When the unit is on, press this button momentarily to enable or disable the scan mode.
Adjusting the Volume (13, 15)
With the unit powered on, press the Up Channel/Volume button (S) to increase volume and the Down Channel/Volume button (T) to decrease volume. The display will indicate the current volume level between 0 to 7 bars on the right lower side of the LCD.
9
9 of 28