Battery Alert
When the battery icon is empty ( ) and flashing on the display, re- charge unit or install fresh batteries.
The battery status is displayed in the top right corner of the LCD with 1,2 or 3 bars (1 bar = low charge, 3 bars = full charge).
Battery Charge Status and Charging Instructions
Initial Charging Sequence
1.Remove batteries from plastic wrapper.
2.Insert batteries into each radio, observing polarity.
3.Place each radio in the charger base (charging LEDs should be on)
4.Charge for
Charging Procedure:
The LED on the charger base will light red as the battery level is read.
There are three battery icon bar segments indicating the battery charge level during charging:
Once the charge reaches the designated voltage, the
1.The LED on the desktop charger will be off when the
2.The battery icon on the LCD displays three bars to indicate a full charge level.
3.After 3 hours, battery charging is complete.
20
128-7973
20 of 28