ROGER 18 Series
ROGER 18 SERIES QUICK REFERENCE CHART
MENU | Channel | Privacy | Power |
Press & |
|
|
|
hold Menu | 1~22 | Off | H/M/L |
button | |||
WX Channel | WX Alert | CTCSS | 1~38 |
| On/Off | DCS | 1~83 |
1~10 |
|
|
VOX | Silent Operation | Roger beep | Call Alert | Vibrate |
oF/1/2/3 | On/Off | On/Off | 1~5 | On/Off |
|
|
| 1~10 for ROGER 18 CAMO | |
MONITOR
Pressing and holding the MONITOR button for 1 second will let you hear noise so you can adjust the volume level of the radio when not receiving a signal. This should be used to check activity on your current channel before transmitting.
Press and hold the MONITOR button for 1 second again to get out of MONITOR mode.
SCAN
Your ROGER 18 Series can scan all 22 channels for
activity. To enter, quickly press the SCAN button. Repeat the same procedure to exit. Your radio will rapidly scan each of the 22 channels and stop on any active channel. Your radio will resume scanning after 4 seconds when the channel is no longer active.
When you press the PTT button to transmit on an active channel, the scanning function will stop and remain on the active channel for 10 seconds before resuming scan when PTT button is no longer pressed.
To resume scanning, quickly press the
/ 
button.
CALL ALERT
Your ROGER 18 Series can transmit a call alert for a fixed
length of time. To send a call alert, press the CALL button. The TX icon will appear while transmitting a call alert and a tone can be heard on the speaker for confirmation.
The ROGER 18 has 5 call alert selections while the ROGER 18 CAMO has 10 call alerts including 5 “animal sound” call alerts - duck, goose, turkey, owl and elk.
Page 9 | www.brunton.com |