Uniden manual Pair the headset to your Bluetooth phone, Charging the BT108 Charging the BT109

Page 4

Charging the BT108

Charging the BT109

Connect the adapter to the power

Connect either adapter to the power connector on the top of

connector on the top of the headset,

the headset. Connect the AC adapter to a standard 120 volt

then plug it into a standard 120 volt

AC (regular indoor) power outlet. Connect the DC adapter to

AC (regular indoor) power outlet.

a standard 12 volt DC (regular automobile) power outlet.

Pair the headset to your Bluetooth phone

Pairing is like “introducing” two Bluetooth devices and giving them permission to connect to each other. If you want to use the headset with more than one phone, you need to pair it with each phone separately. Once a phone and the headset are paired, they can connect automatically whenever they detect each other.

1.Make sure the headset is powered off and the power adapter is not connected (you can’t use the headset while it’s charging).

. Press and hold Power until the LED flashes alternating red and blue. The

headset is in pairing mode and should be visible to other Bluetooth devices.



Image 4
Contents Also in this package Questions? Problems?Adapter Buttons activate What the buttons doFunction after you release them What the LED colors mean Charge the batteryColor State Meaning Pair the headset to your Bluetooth phone Charging the BT108 Charging the BT109Connecting to your phone Using Your Headset Put your headset onWearing the headset on your left ear Available Features Charging the battery completely My phone See page 4 for pairing instructionsMuting the microphone TryGeneral Information Noise or Static on the Headset Battery lifeCertain cordless telephones Cleaning the headset Avoiding hearing damageImportant Safety Instructions Turn off your headset when pumping gasFCC Notice Industry Canada statementTwo-Year Limited Warranty Warrantor Uniden America Corporation UnidenUniden America Service