Uniden DECT1080 manual Settings menu, Tones, Dial mode

Settings menu

Tones

You can switch on or off the tones for key touch, confirmation, call waiting, and out-of-range alarm. For example, when the key tone is set to ON, you will hear a tone each time you press a keypad button.

1Press to access the main menu.

2Press or until Audio Setting is

displayed and press .

3Press until Tones is displayed. Press .

4Press or to select the option you want

Key Confirmation Warning Call Waiting Range Alarm.

Press .

5 Press	or	to display either On or
Off and press		to confirm. For Key tone,
select from pattern 1-3 or off and press			.

6 Press to exit and return to standby.

Dial mode

You can set your phone to use either Tone or Pulse dialing. The pre-set setting is TONE dialing, where you will hear a tone beep each time you dial a number. Most modern exchanges and switchboards use Tone dialing, so you should not need to change this setting. Only change it if your switchboard uses Pulse dialing or if you cannot make a call using Tone dialing.

1Press to access the main menu.

2Press or until Base Settings is

displayed and press .

3Press or to select Additional and

press .

4Press or to display Dial Mode and

press . The current setting is displayed.

[26]