3.Press speaker on the base unit to establish communications between the calling party.
▼Transferring a call from the Base Unit to the Handset
1.During a call, press int on the base unit, the call is placed on hold automatically and the handset is paged. (If there is no answer press int again to return to the call on hold).
2.At the handset, press int to answer the page. An intercom link is now established between base unit the and the handset. Speak into the microphone.
3.Press talk on the handset to establish communications.
STORING A PHONE NUMBER IN MEMORY
The pause button count as one digit. Pressing redial/p more than once increases the length of pause between numbers.
▼Entering Handset Memory Numbers
1.Remove the handset from the base.
2.Press mem . The talk LED blinks.
3.Enter the phone number, up to 16 digits. If a pause is needed during dialing
to access long distance service, press | talk |
redial/p to insert a pause. |
|
4. Press mem again. | redial/p |
|
5.Enter the memory location
the number is stored.
▼Entering Base Unit Memory Numbers
mem
1. | Press mem . The in use/hold/mute |
2. | Enter the phone number, up to 16 digits. |
LED blinks.
mute int
mem hold
If a pause is needed during dialing |
to access long distance service, press |
redial/p to insert a pause. |
3. Press mem again. |
flash
charge
in use/hold/mute
vol
mem
redial/p
redial/p
speaker
4. Enter the memory location | power |
| USING |
|
| ||
the number is stored. | inuse/hold/mute |
| |
the keypad. A tone indicates that |
|
|
|
|
|
| YOUR |
|
| 23 | PHONE |
|
|
|