REGISTRATION
| The original handset supplied with the Main Base is already registered as handset 1, this leaves handset | ||
| numbers 2 - 7 available. It is very important to allocate each handset a different number to enable | ||
| functions such as Call Transfer. |
| |
| Registration Process |
| |
If a handset is registered at | Follow this process for each additional handset (DS805) that needs to be registered to the Main Base | ||
or for registering your Main Handset. |
| ||
any time as handset 1, all | 1. | Remove the handset from its charger |
|
other handsets will need to | 2. | Press flash/reg on the handset (Fig 1). |
|
be registered again from | 3 Press the number 2 (Fig 2) for handset 2. |
| |
|
|
| |
Step 1. |
|
| REGISTER AS |
|
|
| |
| Fig 1. | HAND #2 | |
| Fig 2. | ||
|
|
| |
If you have additional |
|
| REGISTER AS |
handsets, repeat the same |
|
| |
|
| HAND # (3 - 7) | |
process, but at Step 2 select |
|
| |
|
| Fig 3. | |
a number from 3 - 7 to |
|
| |
4. Place the handset in the Main Base Unit (Fig 4). |
| ||
register the next handset as |
| ||
5. Press and hold the Registration button located on the back of the Main Base unit near the DC | |||
(fig 3) |
| power jack (Fig 4). Hold the Registration button in until a long beep confirms the handset has | |
The Registration process needs to be completed within 15 seconds, 3 beep tones will indicate that the time has been exceeded. Please start the process again.
After Registration the | Fig 4. |
|
|
|
|
|
|
handset number is shown |
|
|
|
|
|
|
|
on the Display screen either |
|
|
|
|
|
| Handset |
|
|
|
|
|
| ||
during a call or while the | Fig 5. | HANDSET: | 1 | TALK HIGH 1 |
| ||
| |||||||
handset is charging (Fig 5). |
| NEW: | 1 |
|
| Registration | |
|
|
| number | ||||
| TOTAL: | 1 |
|
| |||
|
|
|
| displayed | |||
|
| Charging | On a Call |
|
| ||
14