Setting Up Your Handset
Install the Battery
1. Unpack the handset, battery pack, and battery cover. If the battery cover is already on the handset, press in on the notch and slide the cover down and off.
2.Line up the battery pack connector with the jack inside the handset.
(The battery connector only fits one way.)
3.Push the battery pack connector in until it clicks into place. Tug gently on the wires to make sure the battery pack is securely connected.
4.Place the cover over the battery compartment and slide it up into place.
Connect the Charger
1.Connect the AC adapter to the charger's AC IN 6.5V jack and
route the cord as shown. (This adapter might already be connected.)
2.Plug the other end of the
adapter into a standard 120V AC power outlet.
3.Place the handset in the charger with the display facing forward. The display on the handset should light up; if it doesn't, reseat the handset or try plugging the AC adapter into a different outlet.
#Charge the handset completely (about 15 hours) before using it.
3