Installing a Replacement Battery
Follow the steps below if you need to replace a battery.
1)Press down on the handset battery case cover (use the finger
indention for a better grip) and slide the cover downward to remove.
2) Remove the existing battery and unplug the connector from the jack.
3) Plug the battery connector (red, white & black wires) into the jack inside the battery compartment. (The connector notches fit into the grooves of the jack only one way). Match the wire colors to the polarity label in the battery compartment, connect the battery and listen for a click to insure connection.
note
•Use only the Uniden
•If you try to use the phone when the battery case cover is open, you will hear beep and see
Please close the battery cover on the
display. Close the battery cover tightly.
N o t e o n P o w e r S o u r c e s
w w w . u n i d e n . c o m | N o t e o n P o w e r S o u r c e s [ 6 6 ] |