Installing the Phone
3)On the handset, press and hold # until the handset beeps and displays Handset Registering.
4)When the handset has registered to the base, the LCD will display Registration complete then show the handset ID number.
If the display shows Registration failed, repeat the process again.
Note: If a handset has ever been registered to a base, reset the handset before you register it to a new base (see Resetting the Handset on page 60). Or to use multiple bases, see the next section.
Using Multiple Bases
The handsets supplied with your phone can be registered to a total of four different bases. Compatible bases include the DECT1500 series and the WXI2077 series. (See our website or contact Customer Service for an
Note: To confirm how many bases the handset is registered to, open the Select Base submenu (follow the step 1 of Selecting the base on page 15). Press END to close the list and return to standby.
Registering the handset to another base
To register a handset to another base:
1)Make sure the handset battery is fully charged.
2)If the other base has an LCD display:
•With the phone in standby, press MENU/SELECT on the base. Move the cursor to select the Register Handset menu, and then press MENU/SELECT. Handset Registering will appear.
If the other base does not have an LCD display:
•Disconnect the base AC adapter. Then press and hold the Find Handset key* while you reconnect the adapter. Keep holding the Find Handset key until the charge LED starts to blink.
*This key might be labeled Find or Find HS.
3)On the handset, press MENU/SELECT. Select the Register Base menu. Handset Registering will appear in the display. (After step 2, you have thirty seconds to complete this step 3 before the system returns to standby.)
14