Finding a Lost Handset
To locate a misplaced handset, press [Int’com] on the base when the phone is in standby. Use [
] or [
] to select the handset you want to page, and then press [Menu/Select]. Select ALL to page all registered handsets.. To cancel paging, press [Int’com] on the base again.
Note: Handsets that are not currently connected to this base will not be paged.
Using Hold, Conference and Transfer
Placing a Call on Hold
) During a call, press [Clear/Int’com] on the handset or [Int’com] on the base to place the caller on hold. If you leave a caller on hold for more than ten seconds, the display screen will read, Line On Hold.
2)To return to the party on hold, press [ /Flash] or [
] on the handset or [
] on the base. The phone will return to the holding party.
Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party’s line will be disconnected and the phone will return to standby.
• While a call is on hold, Caller ID and Call Waiting cannot be received.
Conferencing
If you have more than one handset, up to four people can participate in a conference call. A
) Press [
/Flash] or [
] on the handset or [
] on the base to join the call.
2)To hang up, return the handset to the cradle or press [
] on the handset or [
] on the base. The other party will still be connected to the call.
UsgFinding aHold,Lost HandsetConference
Using Hold,andConferenceTrasferand Transfer
40