Using Hold, Conference, Transfer and Intercom

Put a call on hold	Press [int’com/hold]. If you leave a caller
	on hold for more than five minutes, the call
	will be disconnected. To return to the party
	on hold, press			].
	[	/flash] or [

Join a call in	To join a call already in progress, press
progress	[	/flash] or [		]. You can hang up normally;
	the other station remains connected to the
	call.
Transfer a call	Press [int’com/hold]; the call will
	automatically be placed on hold. Use
	[	] or [	] to select the station you want to
	transfer the call to, and press the
	OK soft key. (To page all stations at once,
	select ALL.) When the other station answers,
	you can talk to the station; the outside call
	remains on hold. If the other station accepts
	the call, you will be disconnected.
Cancel a transfer	To cancel the transfer and return to the call,
	press [		/flash] or [		].

Accept a transferred	To answer the page and speak to the
call	transferring station, press [ /flash] or
	[int’com/hold]. To accept the call and speak
	to the caller, press [				/flash] again.

Make an intercom	With the phone in standby, press
page	[int’com/hold]. Use [					] or [ ] to select the
	station you want to talk with, then press the
	OK soft key. (If you select ALL, all other
	stations will be paged.)

Cancel a page	To cancel the intercom page, press the
	CANCEL soft key or [					].


Answer an intercom	Press [		/flash] or [int’com/hold]. If
page	AutoTalk is on, the handset automatically
	answers the page when you remove it from
	the cradle.

/flash] or [