Uniden DX14560 Series, DX14561 Series manual Symptom, Suggestion

Page 38

	Symptom	Suggestion
		• Re-register both handsets (see page 13).
		• Check both ends of telephone line cord.
		• Make sure the AC adapter is plugged into the base and wall outlet.
	Can’t make or receive calls.	• Disconnect the AC adapter for a few minutes, then reconnect it.
		• Change the digital security code (see page 32).
		• Make sure that the handset is not too far from the base.
		• Check the dialing mode used by your telephone company.
		• Re-register both handsets (see page 13).
		• The battery pack may be weak. Charge the battery for 15-20 hours.
	The handset doesn’t ring or	• The handset may be too far away from the base unit.
	The handset doesn’t ring or	• Place the base unit away from appliances or metal objects.
	receive a page.
	receive a page.	• Change the digital security code (see page 32).
		• Change the digital security code (see page 32).
		• Check the battery pack to ensure there is a secure connection.
		• Make sure ringer volume isn’t set to "off."
		• Keep both handsets away from microwave ovens, computers, remote control
	Severe noise interference.	toys, wireless microphones, alarm systems, intercoms, room monitors,
	Severe noise interference.	fluorescent lights, and electrical appliances.
		fluorescent lights, and electrical appliances.
		• Move the base to another location or turn off the source of interference.

37

Image 38

Contents Page Contents Accessibility WelcomeBase TerminologyManual Conventions ChargerMain Phone Features Product OverviewControls and Functions Handsetsfind key Main Base UnitExtra Charging Cradle TEL LINE jackInstalling the Phone Choosing the Best LocationInstalling the Rechargeable Battery Packs into the Handsets Installing the Base Unit and Charging Cradle Modular Mounting the Base Unit on a Wall Standard wall plate mountingDirect wall mounting Register Handsets to the Main Base before Using The charging cradle can be used to charge any handsetWhen to Re-register Handsets Basic Setup Activating AutoTalkActivating Caller ID on Call Waiting HS1 only Programming Your Area CodeChoosing the Dialing Mode HS1 only Setting the Language Using the Speed Dial Memory Storing a Name and Number in MemoryThe name can be up to 13 characters If you make a mistake while entering a name Storing Caller ID in Speed Dial Memory Making a Call from Speed Dial Memory Using Your PhoneMaking and Receiving Calls To cancel speed dialing Making a Call from the Caller ID ListTo receive a transfer call Transferring a CallTo transfer a call Redialing the Last Dialed Number Selecting the Ring Tone and VolumeAdjusting the Earpiece Volume Temporarily Mute RingerFind Handset Using Call WaitingSelecting a Different Channel To access your voice mailbox Tone Dialing Switch-overVoice Mail Waiting Indicator Caller ID and CIDCW Caller ID on Call Waiting Caller ID on Call Waiting CIDCW Viewing the Caller ID Message ListDeleting all Caller ID names/numbers Deleting Information from the Caller ID ListDeleting a Caller ID message Changing the Digital Security Code Power Failure MaintenanceSpecifications Low battery alert Talk and Standby TimesBattery replacement and handling Cleaning the battery charging contactsTraveling Out-of-Range TroubleshootingCommon Issues Symptom SuggestionSymptom Liquid Damage Rechargeable Nickel-Cadmium Batteries Must Be Recycled or PrecautionsRechargeable Nickel-Cadmium Battery Warning Disposed of ProperlyThe FCC Wants You To Know Important Safety InstructionsSAVE THESE INSTRUCTIONS Radio Interference Terminal Equipment I.C. NoticeCordless Telephone Privacy Radio EquipmentOne Year Limited Warranty I, J, K, L IndexE, F, G, H M, N, O, P, QAt Uniden, we’ll take care of you