Storing Phone Numbers and Names
Memory Dialing allows you to dial a number using just a few key presses. Your cordless telephone stores up to 10 names/numbers in the handset.
1) Press memory in standby mode, ¨Select Memory¨ is | Select Memory | ||
displayed. | 01 |
| |
02 | JOHN DOE | ||
|
• In memory dialing |
operation, you must |
2) Press vol/ / or vol/ / , or enter a number
(1 - 0) to select the memory location where you would like to store the number.
3)Press memory or select.
4)Press memory or select. The Store Name screen appears and a cursor flashes indicating that the display is ready for the name to be entered.
If the Edit screen appears, the selected memory location is already stored. Then you must either edit the entry in this location, delete the entry in this location, or select
¨Go Back¨ to choose another location.
5)To enter a name (up to 13 characters), use the number keys.
01:(Empty) Press Select to edit
Store Name
Edit Memory01
Delete Memory01
Go Back
press a key within 30 |
seconds or the phone |
will return to standby |
mode. If you return |
the handset to the |
base, the phone will |
return to standby |
mode also. |
• You have 30 seconds |
after pressing |
memory or select to |
enter the number you |
wish to store. |
Otherwise, an error |
tone will sound and |
the phone will returns |
• See the "Steps for Entering Names and Special Characters" (see page 25).
• Use #/ and /tone/ to move the cursor to the desired location.
•Use delete/channel to delete characters as needed.
•Press and hold delete/channel to delete all the characters.
•If a name is not required, go to step 6.
to standby mode. |
MEMORY DIALING
www.uniden.com | M E M O R Y D I A L I N G [ 23 ] |