Uniden EXI4246 manual Liquid Damage, Case Action, Handset, Base

Page 39

Liquid Damage

Moisture and liquid can damage your cordless phone. In case of accidental submersion, please follow these steps.

Case	Action

If the handset or base is exposed to	Wipe off the liquid, and use as normal.
moisture or liquid, but it only affects the
exterior plastic housing.

If moisture or liquid has entered the	Handset:
plastic housing (i.e., liquid can be heard	1.Remove the battery cover and leave it off for ventilation
in the phone or liquid has entered the	2.Remove the battery pack by disconnecting
handset battery compartment or vent	3.Leave the battery cover off and the battery pack disconnected for at least 3 days
openings on the base).	4.Once the handset is completely dry, reconnect the battery pack and the battery cover.
	5.Recharge the handset’s battery pack for 20 hours before using again.
	Base:
	1.Disconnect the AC adapter from the base unit, cutting off electrical power.
	2.Disconnect the telephone cord from the base unit.
	3.Let dry for at least 3 days.
	IMPORTANT: You must unplug the telephone line while recharging the battery pack to
	avoid charge interruption.
	CAUTION:
	DO NOT use a microwave oven to speed up the drying process. This will cause permanent
	damage to the handset, base and the microwave oven.
	After following these steps, if your cordless telephone does not work, please call our
	Customer Service Hotline at 1-800-297-1023.

[ 3 8 ] T R O U B L E S H O O T I N G

w w w . u n i d e n . c o m

Image 39

Contents EXI W . u n i d e n . c o m U I C K R E F E R E N C E G U I D E Contents Welcome Features Controls and Functions Terms Used in this Manual C E S S I B I L I T Y AccessibilityInstalling the Phone Choose the Best LocationDo the following steps Install the Rechargeable Battery Pack into the Handset Use only the supplied Connect the Base Unit and Charge the HandsetStandard wall plate mounting Mount the Base Unit on a WallDirect wall mounting Installing the BeltclipHeadset Installation Basic Setup Activating AutoTalkActivating Caller ID on Call Waiting S I C S E T U P 1 Entering Your Area CodeSetting the Language Choosing the Dialing ModeSelecting the Ring Tone and Volume Receiving a call Using Your PhoneMaking and Receiving Calls Making a callAdjusting the Earpiece Volume Redialing the Last Dialed NumberTemporarily Mute Ringer Tone Dialing Switch-over Traveling Out-of-RangeSelecting a Different Channel Find Handset Using Call WaitingVoice Mail Waiting Indicator Storing Names and Numbers in Speed Dial Memory Using the Speed Dial MemoryIf you make a mistake while entering a name W . u n i d e n . c o m Storing Caller ID Messages in Speed Dial Memory Making Calls from Speed Dial Memory To cancel speed dialingCaller ID and Cidcw Caller ID on Call Waiting When a unknown name is receivedViewing the Caller ID Message List Deleting Information from the Caller ID List Deleting a Caller ID messageDeleting all Caller ID names/numbers Caller ID on Call Waiting Cidcw Making a Call from the Caller ID ListChanging the Digital Security Code Low battery alert Battery replacement and handlingPower Failure Talk and Standby Times Cleaning the battery charging contacts Frequency General InformationSymptom Suggestion TroubleshootingAppliances Base Liquid DamageCase Action HandsetPrecautions Radio Interference One Year Limited WarrantyTerminal Equipment Radio Equipment G, H, I, J, K, L IndexMemory List Memo Help for our Special Needs Customers At Uniden, well take care of youG I S T E R O N L I N E T O D AY