Setup Guide
EXI4560/EXI4561
Step 1 Check the Package Contents
Make sure your cordless phone’s packaging includes the following items.
Step 3 Set up the Base
Plug the AC adapter cord to the DC IN 9V jack (yellow).
Route the cord.
Step 5 Connect to the Phone Line
Plug one end of the telephone cord into the base TEL LINE jack.
Additional Features
For more information on these and other features, please refer to your Owner’s Manual. For your convenience, listed below are important features that will help you set up your new cordless phone.
Base | Handset AC adapter |
Plug the other end into the telephone wall
Route the cord.
Handset/Base Set up:
- | Adjust the Earpiece |
| Volume → P.25 |
- | Set the Ringer Volume → P.25 |
Rechargeable Telephone
battery cord
Also included: • Owner’s manual
Step 2 Install the Handset Battery Pack
Note Use ONLY the Uniden rechargeable battery pack supplied with your new phone!
Remove the cover.
Connect the battery pack with the correct polarity.
Replace the cover.
Plug the AC adapter to a 120V AC power outlet.
Note Use ONLY the Uniden AC adapter supplied with your new phone!
Step 4 Charge the Handset
Place the handset in the base.
Make sure that charge LED illuminates.
Charge for
jack.
Step 6 Make & Receive Calls
To Make a Call
Press talk/flash .
Listen for dial tone.
Dial the desired number.
To Receive a Call
Pick up the handset and press talk/flash .
To Hang Up a Call
Press end or return the handset to the base.
- Set Tone/Pulse Dialing → P.17 |
Caller ID:
Set Caller ID on Call Waiting (CIDCW) → P.15
Note: You must subscribe to
Caller ID services through your local telephone provider to use Caller ID and CIDCW.
Refer to your Owner’s Manual for detailed operations.
For answers to questions and to order genuine Uniden parts and accessories 24 hours a day visit our website at www.uniden.com. If you have any problems, you can also call our Customer Hotline at