4)Enter a name according to the instructions below, then press [select/remote]. If no name is required, go to step 5.
• The name can be up to 13 characters.
• Use [
/tone/ ] and [#/ ] to move the cursor to the desired location.
•Press [delete/channel] to delete characters as needed or press and hold to delete all characters. Refer to the letters on the number keys to select the desired characters.
With each press of a numeric key, the displayed character appears in the following order: upper case letters first, lower case letters next and finally the number corresponding to the key.
Note: If the next character uses the same number key, you must press [#/ ] to move the cursor over. Otherwise the next time you press the number key, it changes the character that was previously set.
For example, to enter Movies.
1) Press [6] once. Then press [#/ ] to move the cursor to the right.
2)Press [6] six times.
3)Press [8] six times.
4)Press [4] six times.
5)Press [3] five times.
6)Press [7] eight times.
Number of times key is pressed
keys | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
1
2abc
3def
4ghi
5jkl
6mno
7pqrs
8tuv
9wxyz
0oper
18