Uniden TRU-348 owner manual Connect the base unit, Choose the dialing mode

Page 11

Connect the base unit

1 Connect the telephone line cord to the TEL LINE jack and to a telephone outlet.

2 Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.

3 Set the base unit on a desk or tabletop. Place the handset on the base unit as shown. Then raise the antenna to a vertical position.

If your telephone outlet isn´t modular, contact your telephone company for assistance.

Modular

Choose the dialing mode

Depending on your dialing system, set the PULSE-TONE switch as follows:

If your dialing system is	Set the switch to
Tone	TONE
Pulse	PULSE

If you aren´t sure of your dialing system, make a trial call with the PULSE-TONE switch set to TONE.

If the call connects, leave the switch as is; otherwise, set to PULSE.

•Place the power cord so it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.

•Use only the supplied AD-312 AC adapter. Do not use any other AC adapter.

•Connect the AC adapter to a continuous power supply.

•Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.

GETTING STARTED

G E T T I N G S TA R T E D [ 9 ]

Image 11

Contents U 3 4 Contents Integrated Answering Device Welcome FeaturesT R O D U C T I O N / F E AT U R E S Controls and Functions Voice Memo Key Read This First Checking the Package Contents Choose the best location Setting Up the Base UnitConnect the base unit Choose the dialing modeInstalling the Handset Battery Pack Cleaning the charging contacts Battery use time per chargeWhen the battery charge becomes low Setting Caller ID Options Entering Your Area Code Making a Call Dialing from Standby ModeDialing from Talk Mode From the handset Receiving a CallFrom the base Base ringer switch Adjusting the VolumeHandset ringer tone and volume Earpiece volumeRedialing a Call Redialing from Standby Mode From the HandsetTraveling Out-of-Range Redial from Talk ModeWith the Handset Storing Phone Numbers and NamesE M O RY D I a L I N G This mode, press Hold until the display clears Making Calls with Memory DialingChain Dialing Editing a Stored Name and/or Phone Number Memory01 Stored Memory Store Erasing a Stored Name and Phone Number Way Conferencing When speaking on the handsetWhen speaking on the base Telephone Features Caller ID When the Telephone RingsViewing the Caller ID Message List Standby modeDeleting all Caller ID names/numbers Deleting Information from the Caller ID ListDeleting a Caller ID message Dial edit Using the Caller ID ListLong Distance calls and Area Code Setting/Cancellation Calling a party from the Caller ID listStoring Caller ID messages in Memory dialing Caller ID Features Using Caller ID on Call Waiting ServiceCall Waiting Features E I N T E G R AT E D a N S W E R I N G D E V I C E Integrated Answering DeviceTurning the answering system on/off Setting Up Your Answering SystemSetting the clock Setting your greeting Selecting a PIN code Selecting the message record timeSetting ring time switch Repeating a message Using Your Answering SystemPlaying your messages Deleting a message Skipping a messageRecording a conversation Voice memoDuring the remote Remote access away from homeTurn on the answering machine remotely Remote room monitorChanging the Digital Security Code Headset Installation Installing the BeltclipRecycling NICKEL-CADMIUM Batteries Battery replacement and handlingMaintenance Troubleshooting D D I T I O N a L I N F O R M AT I O N General Information Battery InformationRange Telephone Line ProblemsTechnical Information FCC wants you to knowCordless Telephone Privacy More Than One Cordless TelephoneIndex Please do not Return this Product to the Place of Purchase At Uniden, we´ll take care of youUCZZ01722BZ