Step 2: Connect the Charger
1 Connect the AC adapter to the
DC IN 9V jack and to a standard 120V AC wall outlet.
2 Set the charger on a desk or tabletop, and place the handset
in the charger with the keypad facing forward.
3 Make sure the charge LED illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and that the handset makes good contact with the charger charging contacts.
•Use only the supplied
any other AC adapter.
•Place the charger close to the AC outlet so that you can unplug the AC adapter easily.
4 Charge the handset for
Step 3: Register the Handset
YOU NEED TO REGISTER THE TCX860 TO THE MAIN BASE BEFORE USE!
1 Be sure the handset battery is fully charged.
2 With the main base in standby mode (i.e., not being used), place the expansion handset in the main base to begin registration.
3 While the handset is registering, Handset Registering will appear in the handset LCD. When
Registration Complete is
displayed, the handset has been registered to the base. If Registration Failed appears, please try these steps again.
1
TCX860 | Charge the handset |
Handset | for |
Charger |
|
2 | TCX860 |
| Handset |
Place the TCX860 handset in the main base to register.
|
| Main Base |
|
|
|
|
|
|
|
|
|
|
|
|
|
| TCX860 Handset |
3 |
| + |
| Main Base |
– 4 –