Uniden SS E15 owner manual Liquid Damage, Case Action

Page 39

Liquid Damage

Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the following steps.

Case		Action
If the handset or base is	Wipe off the liquid, and use as normal.
exposed to moisture or
liquid, but it only affects the
exterior plastic housing.

If moisture or liquid has	Handset:
entered the plastic- housing	1)	Remove the battery cover and leave it off for ventilation.
(i. e. liquid can be heard in	2)	Remove the battery pack by disconnecting.
the phone or liquid has	3)	Leave the battery cover off and the battery pack disconnected for at least 3 days.
entered the handset battery	4)	Once the handset is completely dry, reconnect the battery pack and the battery
compartment or vent	5)	cover.
openings on the base).	5)	Recharge the handset's battery pack for 20 hours before using again.
	Base:
	1)	Disconnect the AC adaptor from the base unit, cutting off electrical power.
	2)	Disconnect the telephone cord from the base unit.
	3)	Let dry for at least 3 days.
	IMPORTANT: You must unplug the telephone line while recharging the battery pack
	to avoid charge interruption.
	CAUTION: DO NOT use a microwave oven to speed up the drying process. This will
	cause permanent damage to the handset, base and the microwave oven. After
	following these steps, if your cordless telephone does not work, please visit our
	website for further information (www.uniden.com.au or www.uniden.co.nz).

		[37]

ADDITIONAL INFORMATION

Image 39

Contents SS E15 Page Contents Explanation purposes Welcome FeaturesDelete/channel key p Controls and FunctionsTerms Used in this Manual Choose the best location Installing the PhoneConnect the Base Unit and Charge the Handset Rechargeable battery is already installed in your phoneGetting Started Set the Visual Ringer Brightness Standard wall plate mounting Mount the Base Unit on a WallTo remove the beltclip Installing the BeltclipHeadset Installation To attach the beltclipActivating Caller ID on Call Waiting AutoTalkSetting Name Tag POP ID Setting the Insert Base ringer tone Base ringer volumeHandset ringer tone and volume Base ringer on/offMaking and Receiving Calls Using Your PhoneAdjusting the Handset Earpiece Volume Redialing the last dialed numberAudio boost Traveling Out-of-Range Find Handset Selecting a Different ChannelVisual Message Waiting Indicator Using Call WaitingStoring the Emergency Dial Emergency DialMemory key Using the Speed Dial MemoryIf you make a mistake while entering a name Using the Speed Dial Memory Storing Caller ID Messages in Speed Memory Locations Easy Dial Making Calls from Speed Dial MemoryCaller ID and Cidcw Caller ID on Call Waiting When the Telephone RingsViewing the Caller ID Message List Caller ID FeaturesDeleting a Caller ID message Deleting Information from the Caller ID ListDeleting all Caller ID names/numbers Making a Call from the Caller ID List Changing the Digital Security Code Low battery alert Battery replacement and handlingPower Failure Installing a Replacement Battery Maintenance Symptom Suggestion TroubleshootingSymptom Suggestion Case Action Liquid DamageBattery Information General InformationAC Adapter Information X , Y, Z IndexK, L O, P, QWarranty is only valid in the original country of purchase One Year Limited WarrantyPage Thank YOU for Buying a Uniden Product