Using Special Features, Using the Phonebook

Using Call Waiting

♦♦Call Waiting, a service available from your telephone provider, lets you receive calls while you are on another call. Caller ID on Call Waiting (CIDCW) service displays Caller ID information for a waiting call.

♦♦If you get a Call Waiting call, the phone sounds a tone and displays any CID information received from the waiting call. Press Talk/flash to switch between the current call and the waiting call; each time you switch, there is a short pause before you're connected to the other call.

Using the Phonebook

The phone can store up to 100 entries in its phonebook. All handsets share the same phonebook, so only one handset can access it at a time.

	To...	Press...
	open/close the phonebook	Phonebook.
	scroll through the entries	Down to scroll through the entries from A to Z.
	scroll through the entries	Up to scroll from Z to A.
		Up to scroll from Z to A.
	jump to entries that start	the number key corresponding to the letter
	with a certain letter	you want.
	dial the current entry	Talk/flash or Speaker.
	edit the current entry	Menu/select, then select Edit.
	delete the current entry	Menu/select, then select Delete. When the
	delete the current entry	phone prompts you to confirm, select Yes.
		phone prompts you to confirm, select Yes.

Adding Phonebook Entries

With the phone in standby, open the phonebook. Press Menu/select and select Create New. Enter a name & number and select a personal ring.

♦♦Enter the phone number (up to 20 digits) exactly as you would dial it.

♦♦If you need the phone to wait before sending the next set of digits, press Redial/pause to insert a 2-second pause. You can insert multiple pauses, but each one counts as a digit (you’ll see P in the display).

Deleting All the Phonebook Entries

With the phone in standby, open the phonebook. Press Menu/select and select Delete All. When the phone prompts you to confirm, select Yes.