Uniden 8985 manual Preparing the battery pack, Total00

Page 13

Use only Uniden Battery BT-905.

Preparing the battery pack

Charge the battery pack for more than 12-15 hours before you start using your phone.

1	Remove the battery cover.
2	Connect the battery pack
	connector with the correct
	polarity (black and red wires),
	then insert the battery pack
Black	into the battery compartment.
Red
3	Slide the battery cover forward
	until it snaps into place.

4 Place the handset on the base.


	Total:00
	Make sure that the “status”
	LED of the base unit lights, and
	charging begins. Charge the
	battery for at least 12-15 hours.
	You can place the handset
status LED	either side up for charging the
	battery.

Image 13

Contents Page Introduction Features310 Controls and functions50 51 52 Contents Read this first Next, choose the best location to set up the base unitBase unit HandsetChecking the package contents Choose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seeIf your dialing system is Set the switch to Tone Choose the dialing modeContact your telephone company for Assistance PulseStandard wall plate mounting Mounting the base unit on a wallIs firmly seated Direct wall plate mounting Total00 Preparing the battery packWhen the battery charge becomes low Battery use time per chargeCleaning the battery contacts Do not use any liquids or solventsAuto TalkOff Cidcw On Area Code Setting the Caller ID optionsPress ¥or »to move the cursor to the item that is to be set Press 3 to select Area Code Entering your area codeBeep sounds and the displayed area code is entered From the handset Making a callFrom the base Handset on the basePhone rings. The status LED on the base flashes Receiving a callPress speaker to finish the call When speaking with the handset When speaking with the baseWhen phone is ringing MuteRinger a High Adjusting the ringer and earpiece volumeRinger a Low Ringer B HighOn-hook redialing Redialing a callLast three phone numbers entered can be quickly redialed Redial2Press talk Talk appears flashing on the display. Talk Off-hook redialingTalk High Using the speaker phone Intercom from the handset to base To transfer from the handset to the base Transferring a callTo transfer from the base to the handset On the handeset Storing phone numbers and namesPress and hold mem until Memory Store is displayed Memory Store 01 Uniden Corp 02 John DOEStore Number is Store Number817555330 Memory03 StoredOn the base On-hook dialing Making calls with memory dialingPress mem Handset displays your programmed memory locations Memory16Talk Talk High Off-hook dialingTalk 035 See Editing a stored name and/or phone numberEdit Memory01 Delete Memory01 Go Back Select Edit Memory Store Name817858330 Memory01 StoredWith the handset Erasing a stored name and phone numberEdit Memory02 Delete Memory02After 2 seconds the display With the baseReturns to Memory Store screenWhen speaking on the base When speaking on the handsetWay conferencing Caller ID service 11 1230PM When the telephone rings1230PM 813-8 3300New Total02 Viewing the Caller ID Message listPress »to display the latest caller ID message 17 1230PMWhen the pointer is at No When the pointer is at YesDeleting information from the Caller ID list Deleting a Caller ID messageDelete All ? Deleting all Caller ID name/numbersOr »to select Display returns to the summary screenCalling a party from the Caller ID list Using the Caller ID list8178583300 Select Location Storing Caller ID messages in Memory dialingTalk Uniden Corp Using Caller ID with call waiting serviceIntegrated answering device IntegratedSetting the clock » Preset Message Setting your greeting» Recording your personal greeting » Choosing between two greetings» Announce only feature Switch toSelecting the message record time Selecting a PIN codeSetting ring time switch Playing your message Using your answering systemBase LED shows the number of total messages on Waiting for you. The Exai 8955 is designed to play your newSkipping a message Repeating a messageVoice memo Deleting a message» Deleting individual message » Deleting all messagesRecording a conversation Command Function Remote access away from homeRemote room monitor Changing the digital security code Additional InformationHeadset installation Installing the beltclipTo attach the beltclip To remove the beltclip Battery replacement and handling MaintenanceSymptom Suggestion TroubleshootingTo help eliminate Background noiseSymptom Suggestion General SpecificationsBase unit HandsetIndex Digital security code Earpiece volume Headset installationK, L W, X, Y, Z

Preparing the battery pack

Total:00

battery.