UP334BH (WDECT2315) ENG OM 3/18/04 9:39 AM Page 12
Global Setup
If you change one of the Global settings, you change the setting for all additional handsets. Only one handset can change Global settings at a time.
Submenu name | Description |
Day & time | Set the day and time of your display (see page 17). |
Name Tag (POP ID) | Display the stored name with the Caller ID telephone number, if the displayed |
(Default is on) | Caller ID telephone number is exactly the same as a number stored in the |
| phone book (see page 17). |
Insert 0 | Add “0” or “00” to the number, when you receive the Caller ID message |
| (New Zealand only) (see page 17). |
Dial Mode | Set the dial mode to tone or pulse (see page 18). Most phone systems use tone |
(Australia only) | dialing, which send DTMF tone through phone line. The default is tone dialing. |
(Default is tone) | Depends on your dialing system, set the dial mode. |
Copy Phonebook | Allow you to transfer the phonebook data stored in one handset to another |
| handset (see page 18). |
|
|
System Reset
System Reset is used to clear the handset’s ID from the main base unit, or the base ID from the handset.
Submenu name | Description |
Deregister HS | Clear the handset ID from the base. Use this option, for example, when you change |
| the digital security code (see page 19). |
Replacing Base | Clear the base ID. Use this option, for example, if you wish to deregister the base |
| to use the handset with another base of the WDECT2315 and WDECT2355 series |
| (see page 19). |
|
|
[ 12 ]