If the selected speed dial number is already assigned, the Edit screen appears. You can select EDIT MEMORY to edit this entry, select DELETE MEMORY to erase this entry, or select GO BACK to choose another speed dial number.
4)Enter a name according to the instructions below.
•The name can be up to 14 characters.
•Use [∗/tone/
] and [#/
] to move the cursor to the desired location.
•Use [delete/channel] to delete characters as needed.
•Press and hold [delete/channel] to delete all the characters.
•If no name is required, go to step 5.
Refer to the letters on the number keys to select the desired characters.
Each time you press a numeric key, the displayed character appears in the following order: Upper case letters first, lower case letters next and finally the number corresponding to the key.
If you make a mistake while entering a name
Use [∗/tone/
] or [#/
] to move the cursor to the incorrect character.
Press [delete/channel] to erase the wrong character. Then enter the correct character. To delete all characters, press and hold [delete/channel].
w w w . u n i d e n . c o m | SPEED DIALING FROM THE CORDLESS HANDSET [26] |