Uniden CLX 485 owner manual Connect the base and charge the handset

Page 10

Connect the base and charge the handset

1)Connect the AC adapter to the DC IN 9V jack.

Place the base close to the AC outlet to avoid long extension cords.

2) Connect the AC adapter to a continuous power supply (i.e., an outlet that is not controlled by a switch).

3) Place the handset in the base with the display facing forward.

4) Make sure that the charge LED illuminates.

If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the base charging contacts.

5)Charge your handset at least 15 hours before plugging into the phone line.

6) Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and to a telephone outlet.

note

•Use only the supplied

AD-0006 AC adapter. Do not use any other AC adapter.

•Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.

•Don't place the base in direct sunlight or subject it to high temperatures. The battery may not charge properly.

If your telephone outlet isn't modular, contact your telephone company.

[ 9 ] Setting up the Phone

w w w . u n i d e n . c o m

Image 10

Contents Series Owners Manual Contents Features WelcomeAccessibility TerminologyBack/hold/intercom P , 40 Controls & FunctionsSpeakerphone Speaker and Ringer 21 24 25 26 27 Speaker/flash P Setting up the Phone For maximum rangeInstall the rechargeable battery pack Low battery alert Cleaning the battery charging contactsConnect the base and charge the handset Do not use an AC outlet controlled by a wall switch Mounting the Base Unit on a WallBackwards/Forwards Compatibility Expanding Your PhoneHandsets Connect the expansion handsets charger From the base, press menu/select and select System To attach the beltclip Installing the BeltclipChanging the Digital Security Code To remove the beltclipOptional Headset Installation Installing Unidens Cordless Telephone Customization ToolTo PC To the USB jack Example of the standby mode display Handset Using the InterfaceBase Display Icons Icon DescriptionSoft Key Function Standby modeTalk mode HandsetUsing the joystick Entering text Main Menu Options Handset Main Menu OptionsLCD Contrast For Base System Setup MenuSystem Setup Handset or Base Key Touch ToneLanguage For Base System Setup Handset Base Call PrivacyCall Privacy Auto Talk Handset onlyUnique ID Handset only System Setup Any Key Answer Banner DisplayBanner Handset only Any Key Answer Handset onlySystem Setup Global Global SetupDate and Time Call Waiting Area CodeDial Mode Setting the Ringer Options Ringer ToneUnique Ring Setup Base Only Customize Your Own Distinctive Ringer Tones Handset OnlyStoring Ringer Tones Playing the RingerChanging Ringer Name Delete RingerWall Paper Handset Only Display Settings Handset OnlyDisplayOptions Color Scheme Color handsets only LCD Contrast for the handsetDelete Done Talk Animation Type Handset onlyLanguage for the handset End unavailableMaking Calls Using Your PhoneFrom the Handset From the Handset Speakerphone From the baseHanging Up Switching to the Handset Speakerphone During a CallReceiving a call From the baseCall Waiting Deluxe Moving out of rangeCall Waiting To scroll through the help, press the soft keyAsk to Hold Placing a Call on HoldShortly, and the call is place on hold Line will disconnect in 15 seconds ConferencingJoining a Conference Call Appears in the display, and you cannot join the callRedialing Calls Invite someone to a conferenceAdjusting the base speaker volume Adjusting Base Ringer and Speaker VolumesAdjusting the base ringer volume Rings/VolumesUsing the Handset Volume Options Earpiece speakerMute the Microphone Speaker SetupMute Audio TonePrivacy Mode Tone Dialing Switch OverFind Handset Reminder Handset only Editing and deleting reminders Using the Phonebook Creating and Editing Phonebook EntriesName Unique RingPhonebook Group Unique Display Handset onlySpeed Dial Storing Caller ID or Redial Numbers in the Phonebook Storing and Editing Numbers from the Dial OperationDeleting phonebook entries Managing the PhonebookCopying phonebook entries to another handset Checking the number of stored entries Changing the sorting orderNaming phonebook groups Using the Speed DialMaking Calls with the Phonebook Caller ID Features Using the Caller ID ListDeleting Caller ID numbers Calling someone from the Caller ID listFeatures Answering MachineSystem Setup Answer Machine Setting Up the Answering MachineSecurity Code Ring Time Record TimeLanguage System Setup Answering MachineMessage Alert Call ScreenRecording a greeting From the base Setting Your Outgoing GreetingChoosing a greeting From the base From the handset Slide the Joystick up Using the Answering MachineTurning On the Answering Machine Reviewing Messages From the handset Screening Calls Recording a phone conversationIf the recording memory is full Do Not Disturb DND Recording a voice memoRemote Operation Stop Using DirectLink Mode Multi-Handset FeaturesIf the party is out Room/Baby Monitor Intercom Answering an intercomTransferring a Call Answering a transferOptional Power Backup Feature Power FailureBattery replacement and handling Install the optional power backup battery in the base AC Adapter Information Battery InformationGeneral Information 900mAhTroubleshooting Not work Make sure the base unit is plugged Call was placed through a switchboardBeen a temporary service interruption Make sure that the answering machine is turned onMake sure you are using the correct PIN number Tone phone Cannot, you may have to use another phoneReplacing the Base Setting System ResetDe-register the Handset Liquid Damage Precautions One Year Limited Warranty Terminal Equipment Index N D ED E X 8 Memo Remote access away from home Remote Operation CardTask Key At Uniden, well take care of you Register Online Today