JetAudio T2 manual Using FM Radio, Listening to FM Radio, Setting and Using Preset Channels

26Using Advanced Features

3.2. Using FM Radio

■Listening to FM Radio

1.Turn on the player and then select the FM Radio mode.

2.Press buttons briefly to change the tuning frequency at 0.1Mhz step

3.Press and holdbuttons scan for the nearest FM radio station with good reception

-If you were listening to FM Radio before turning off the player, the player will automatically start with the FM Radio when turned on.

-Earphone wire works as an antenna for FM Radio signals and thus improves the quality of reception when straightened.

■Setting and Using Preset Channels

Setting preset channels to favorite stations avoids manual scanning through all frequencies.

6.In FM Radio tuning mode, pressingbutton switches to PRESET scanning mode and “PRESET” appears on the screen.

7.Pressing button in the PRESET scanning mode returns to FM tuning mode. The “PRESET” will disappear

-If there are no frequencies in Preset mode, the tuning frequency will not change. -Up to 24 frequencies can be stored in Preset Channels.

■Recording FM Radio

Press Long

1.After the player is turned on, select the FM Radio mode.

2.Set the tuning frequency to the desired radio station.

3.Press and hold button to start recording.

4.Pressbutton again to stop recording.

■Scheduled Recording of FM Radio

Timer Time setup Wakeup mode Wakeup Time

Time setup

07 : 07 PM

2006 . 5 . 5

1.After the player is turned on, select the FM Radio mode.

2.Tune to the favorite station and pressbutton to change to a PRESET list.

3.Press +, - buttons to highlight the desired preset channel and then press and hold button to open a pop-up window.

4.Select “Save Current Ch” to add the currently selected frequency to the PRESET list.

5.Listen to the preset channels by selecting “Listen Ch” or delete preset channels by selecting “Delete Ch”

iAUDIO T2

iAUDIO T2